Home › Engine / Hybrid System › 1KD-FTV ENGINE MECHANICAL › ENGINE UNIT
NM1840EF _51 Engine / Hybrid System _010303 1KD-FTV ENGINE MECHANICAL _0055228 ENGINE UNIT DE DETAILS F

1KD-FTV ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE MECHANISM  


CONSTRUCTION


a.

Each cylinder has 2 intake valves and 2 exhaust valves. Intake and exhaust efficiency is increased by means of the larger total port areas.


b.

The valves are directly opened and closed by 2 camshafts.


c.

The camshaft (intake camshaft) is driven by a timing belt, while the No. 2 camshaft (exhaust camshaft) is driven by gears on the camshaft (intake camshaft).


d.

Small-diameter, flat-teeth gears are used for driving the No. 2 camshaft (exhaust camshaft) in order to reduce gear noise.

W102864
2.719,1.271 1.469,1.271 true 2.781,0.844 2.781,0.417 true 2.896,0.885 2.896,0.573 2.896,0.573 2.792,0.573 true 4.146,0.781 4.49,0.448 4.49,0.448 4.708,0.448 true 4.354,0.854 4.5,0.708 4.5,0.708 4.708,0.708 true 4.354,2.063 5.135,2.833 5.135,2.833 5.24,2.833 true 3.625,1.927 5.094,3.406 5.094,3.406 5.292,3.406 true 1.302,1.188 1.469,1.354 0.167,0.167 10 false *1 4.729,0.615 4.896,0.781 0.167,0.167 10 false *4 5.26,2.75 5.427,2.917 0.167,0.167 10 false *5 5.313,3.323 5.479,3.49 0.167,0.167 10 false *5 2.698,0.229 2.875,0.406 0.177,0.177 10 false *2 4.719,0.354 4.885,0.521 0.167,0.167 10 false *3
*1 Timing Belt *2 Camshaft Drive Gear
*3 No. 2 Camshaft (Exhaust Camshaft) *4 Camshaft (Intake Camshaft)
*5 Balance Shaft - -