Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › ENGINE UNIT
NM1840EF _51 Engine / Hybrid System _010301 2TR-FE ENGINE MECHANICAL _0055226 ENGINE UNIT DE DETAILS F

2TR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VVT-i CONTROLLER  


CONSTRUCTION


a.

This controller consists of a housing driven by the timing chain and a vane coupled with the intake camshaft. The oil pressure sent from the advance or retard side path at the intake camshaft causes rotation in the VVT-i controller vane circumferential direction to vary the intake valve timing continuously.


b.

When the engine is stopped, the intake camshaft will be in the most retarded state to ensure startability. When hydraulic pressure is not applied to the VVT-i controller immediately after the engine has started, the lock pin locks the movement of the VVT-i controller to prevent a knocking noise. Thereafter, when hydraulic pressure is applied to the VVT-i controller, the lock pin is released.

W102316
2.521,2.833 2.521,3.438 2.521,3.438 2.635,3.438 true 3.844,2.5 3.844,2.979 3.844,2.979 3.99,2.979 true 4.76,2.292 4.917,2.615 4.917,2.615 5.031,2.615 true 6.177,1.417 6.177,1.865 6.177,1.865 6.323,1.865 true 3.656,1.875 3.865,0.958 3.865,0.958 4.021,0.958 true 1.115,3.094 1.323,3.375 1.323,3.375 1.469,3.375 true 1.625,1.073 1.833,1.396 0.208,0.323 10 false *a 2.583,1.073 2.792,1.396 0.208,0.323 10 false *b 4.052,0.875 4.24,1.156 0.188,0.281 10 false *1 1.51,3.281 1.698,3.563 0.188,0.281 10 false *2 2.698,3.354 2.885,3.635 0.188,0.281 10 false *3 4.031,2.875 4.219,3.156 0.188,0.281 10 false *4 5.073,2.51 5.26,2.792 0.188,0.281 10 false *5 6.375,1.771 6.563,2.052 0.188,0.281 10 false *6
*1 Lock Pin *2 Timing Rotor
*3 Outer Housing *4 Vane (Coupled to Intake Camshaft)
*5 Timing Chain Sprocket *6 Intake Camshaft
*a Engine Operating *b Engine Stopped
V100135

Oil Pressure - -