Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › ENGINE UNIT
NM1840EF _51 Engine / Hybrid System _010301 2TR-FE ENGINE MECHANICAL _0055226 ENGINE UNIT DE DETAILS F

2TR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CYLINDER HEAD  


CONSTRUCTION


a.

The cylinder head, which is made of aluminum alloy, contains a pentroof type combustion chamber. The spark plug has been located in the center of the combustion chamber in order to improve the engine's anti-knocking performance.


b.

The angle between the intake and exhaust valves is narrowed and set at 22.85° to permit a compact cylinder head.


c.

A cross-flow intake and exhaust layout is used to improve intake and exhaust efficiency.


d.

A taper squish combustion chamber is used to improve anti-knocking performance and intake efficiency. In addition, engine performance and fuel economy have been improved.


e.

Long nozzle type fuel injector assemblies are installed in the cylinder head to reduce the distance from the fuel injector to the intake valve, thus preventing the fuel from adhering to the intake port walls, and reducing exhaust emissions.


f.

The routing of the water jacket in the cylinder head is optimized to achieve higher cooling performance.


g.

An air injection port, which directs the air from the air pump assembly to the exhaust port of each cylinder, has been provided on top of the exhaust port on the models with the air injection system.

W102304
4.01,1.26 4.01,0.792 4.01,0.792 4.167,0.792 true 1.438,1.969 1.167,1.771 1.167,1.771 1.01,1.771 true 2.063,2.833 2.063,3.469 2.063,3.469 3.406,3.469 true 5.51,1.167 5.51,0.573 5.51,0.573 5.667,0.573 true 6.167,1.75 6.167,1.167 6.167,1.167 6.323,1.167 true 2.979,2.823 2.979,3.469 true 4.198,0.677 4.417,0.896 0.219,0.219 10 false *1 3.448,3.344 3.667,3.563 0.219,0.219 10 false *b 0.563,1.708 1.073,1.927 0.51,0.219 10 false *a (*A) 2.333,0.229 2.927,0.448 0.594,0.219 10 false 22.85° 5.708,0.458 5.927,0.677 0.219,0.219 10 false *c 6.365,1.083 6.583,1.302 0.219,0.219 10 false *d
*A Models Compliant with EURO 3 and EURO 4 Emission Regulations - -
*1 Fuel Injector Assembly - -
*a Air Injection Port *b Taper Squish
*c Long Nozzle Type *d Conventional Type
V100144

Water Jacket - -