CONSTRUCTION
The valve lash adjuster assembly, which is located at the fulcrum (pivot point) of the valve rocker arm sub-assemblies, consists primarily of a plunger, a plunger spring, a check ball, and a check ball spring.
The engine oil that is supplied by the cylinder head and the built-in spring actuates the valve lash adjuster assembly. The oil pressure and the spring force that act on the plunger push the valve rocker arm sub-assembly against the cam, in order to adjust the valve clearance that is created during the opening and closing of the valve. This results in both improving the quietness of the engine and making valve clearance adjustments unnecessary.
| *1 | Plunger | *2 | Check Ball |
| *3 | Check Ball Spring | *4 | Plunger Spring |
| *5 | Valve Lash Adjuster Assembly | *6 | Cam |
| *7 | Valve Rocker Arm Sub-assembly | - | - |
| *a | Oil Passage | - | - |