CONSTRUCTION
The crankshaft has 5 journals and 8 balance weights.
All pin and journal fillets are roll-finished to maintain adequate strength.
The crankshaft bearing caps are tightened using 2 plastic region tightening bolts for each journal.
The crankshaft bearing caps are tightened using 2 plastic region tightening bolts for each journal.
Similar to the connecting rod bearings, the lining surface of the crankshaft bearings has been micro-grooved to achieve an optimal amount of oil clearance. As a result, cold-engine cranking performance has been improved and engine vibrations have been reduced.
The upper main bearing has an oil groove around its inside circumference.
| *1 | Upper Main Bearing | *2 | Lower Main Bearing |
| *a | Roll-finished | *b | Oil Hole |
| *c | Oil Grooved | *d | Micro-grooved |