CONSTRUCTION
The pistons are made of aluminum alloy.
The tops of the pistons use a taper squish shape to achieve fuel combustion efficiency.
The piston skirt is coated with resin to reduce friction losses.
The groove of the top ring has been coated with anodic oxide to improve wear resistance and rust resistance.
For ethanol fuel compliance, abrasion resistance has been enhanced by applying nitriding coating to the top and bottom surfaces of the No. 1 compression ring.
A Physical Vapor Deposition (PVD) coating has been applied to the outer surface of the No. 1 compression ring and oil ring, and hard chromium plating has been applied to the No. 2 compression ring, in order to improve their wear resistance.
| *1 | Piston | *2 | No. 1 Compression Ring |
| *3 | No. 2 Compression Ring | *4 | Oil Ring |
| *a | Taper Squish Shape | *b | Nitriding Coating |
| *c | PVD Coating | *d | Chromium Plating |
|
Resin Coating |
|
Anodic Oxide Coating |