CONSTRUCTION
This engine uses valve rocker arm sub-assemblies with built-in needle bearings. This reduces the friction that occurs between the cams and the roller rocker arms when the valves are pushed down, thus improving fuel economy.
A valve lash adjuster assembly, which maintains a constant zero valve clearance through the use of oil pressure and spring force, is used.
The intake camshaft and exhaust camshaft are driven by the crankshaft via the timing chain.
The VVT-i system is used to achieve low fuel consumption and higher engine performance to reduce exhaust emissions.
Soft nitriding treatment has been applied to the intake and exhaust valves to be compatible with alcohol fuel.
| *1 | Timing Chain | *2 | VVT-i Controller |
| *3 | Chain Tensioner | *4 | Chain Slipper |
| *5 | Chain Damper | *6 | Exhaust Camshaft |
| *7 | Intake Camshaft | *8 | Valve Rocker Arm Sub-assembly |
| *9 | Valve Lash Adjuster Assembly | *10 | Valve |