Home › Engine / Hybrid System › 2TR-FBE ENGINE MECHANICAL › ENGINE UNIT
NM1840EF _51 Engine / Hybrid System _010302 2TR-FBE ENGINE MECHANICAL _0055227 ENGINE UNIT DE DETAILS F

2TR-FBE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD AND CONNECTING ROD BEARING  


CONSTRUCTION


a.

Connecting rods that have been forged for high strength are used for weight reduction.


b.

Knock pins are used at the mating surfaces of the bearing caps of the connecting rod to minimize the shifting of the bearing caps during assembly.


c.

Plastic region tightening bolts are used.


d.

An aluminum bearing is used for the connecting rod bearings. Resin coating is applied to the connecting rod bearing, thus ensuring reliability.

W105091
1.792,3.031 1.792,3.479 1.792,3.479 3.042,3.479 true 2.625,2.625 2.823,2.313 2.823,2.313 2.958,2.313 true 5.563,2.573 5.729,2.896 5.729,2.896 5.896,2.896 true 2.635,3.031 2.635,3.479 true 3.063,3.365 3.344,3.604 0.281,0.24 10 false *2 2.99,2.208 3.271,2.448 0.281,0.24 10 false *1 5.927,2.781 6.208,3.021 0.281,0.24 10 false *3
*1 Knock Pin *2 Plastic Region Tightening Bolt
*3 Connecting Rod Bearing - -
V100144

Resin Coating - -