Home › Engine / Hybrid System › 2TR-FBE ENGINE MECHANICAL › ENGINE UNIT
NM1840EF _51 Engine / Hybrid System _010302 2TR-FBE ENGINE MECHANICAL _0055227 ENGINE UNIT DE DETAILS F

2TR-FBE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CRANKSHAFT AND BEARING  


CONSTRUCTION


a.

The crankshaft has 5 journals and 8 balance weights.


b.

All pin and journal fillets are roll-finished to maintain adequate strength.


c.

The crankshaft bearing is made of aluminum alloy.


d.

The crankshaft bearing caps are tightened using 2 plastic region tightening bolts for each journal.


e.

Similar to the connecting rod bearings, the lining surface of the crankshaft bearings has been micro-grooved to achieve an optimal amount of oil clearance. As a result, cold-engine cranking performance has been improved and engine vibrations have been reduced.


f.

The upper main bearing has an oil groove around its inside circumference.

W102925
5.792,2.146 5.948,2.417 5.948,2.417 6.083,2.417 true 4.896,1.448 4.677,1.635 4.677,1.635 4.521,1.635 true 4.865,1.042 4.688,0.875 4.688,0.875 4.563,0.875 true 5.042,0.938 4.906,0.563 4.906,0.563 4.781,0.563 true 5.76,0.74 5.99,0.333 5.99,0.333 6.135,0.333 true 1.271,1.958 1.052,1.615 1.052,1.615 0.885,1.615 true 1.063,0.125 1.302,0.365 0.24,0.24 10 false *a 0.708,1.521 0.948,1.76 0.24,0.24 10 false *b 6.156,0.24 6.396,0.479 0.24,0.24 10 false *1 4.604,0.469 4.844,0.708 0.24,0.24 10 false *c 4.396,0.792 4.635,1.031 0.24,0.24 10 false *d 4.365,1.542 4.604,1.781 0.24,0.24 10 false *d 6.094,2.333 6.333,2.573 0.24,0.24 10 false *2
*1 Upper Main Bearing *2 Lower Main Bearing
*a Roll-finished *b Oil Hole
*c Oil Grooved *d Micro-grooved