SYSTEM CONTROL
In this system, the highly pressurized fuel supplied by the supply pump is stored in the common-rail, and the ECM sends signals to the injectors via the injector driver in order to control the injection timing and injection volume.
| *A | Models Compliant with EURO 4 Emission Regulations | - | - |
| *1 | Fuel Pressure Sensor | *2 | Common-rail Assembly |
| *3 | Pressure Discharge Valve | *4 | Supply Pump Assembly |
| *5 | Fuel Temperature Sensor | *6 | Suction Control Valve (SCV) |
| *7 | Injector Assembly | *8 | Fuel Filter Assembly |
| *9 | Fuel Cooler | *10 | Fuel Tank |
| *11 | Injector Driver | *12 | ECM |
| *13 | Crank Position Sensor (NE Signal) | *14 | Camshaft Position Sensor (G Signal) |
| *a | Fuel (Suction) | *b | Fuel (Return) |
| *c | Fuel (High Pressure) | - | - |