Home › Engine / Hybrid System › 2KD-FTV FUEL › FUEL SYSTEM › 2011.10–2012.04
NM1840EF _51 Engine / Hybrid System _010308 2KD-FTV FUEL _0055233 FUEL SYSTEM DE DETAILS F

2KD-FTV FUEL  FUEL SYSTEM  DETAILS  COMMON-RAIL  


CONSTRUCTION


a.

The function of the common-rail is to store the fuel that has been pressurized by the supply pump.


b.

The common-rail is provided with a fuel pressure sensor and pressure discharge valve.


c.

The fuel pressure sensor detects the fuel pressure in the common-rail.


d.

The pressure discharge valve regulates the fuel pressure. In the pressure discharge valve, the plunger opens and closes in accordance with the actuation signals from the injector driver. Thus, it regulates pressure by releasing excess pressure from the common-rail. In addition, it has a pressure reduction function in case of emergency.


e.

Internally, the common-rail contains a main hole and 5 branch holes that intersect the main hole. Each branch hole functions as an orifice that dampens the fluctuation of the fuel pressure.

W112520
5.208,1.146 5.448,1.521 5.448,1.521 5.646,1.521 true 3.656,1.042 3.844,1.438 3.844,1.438 3.979,1.438 true 3.396,1.021 3.219,1.49 3.219,1.49 3.115,1.49 true 2.052,0.813 1.729,0.333 1.729,0.333 1.583,0.333 true 1.635,0.802 1.219,0.573 1.219,0.573 0.948,0.573 true 5.677,1.417 5.99,1.615 0.313,0.198 10 false *3 4,1.333 4.313,1.531 0.313,0.198 10 false *4 2.927,1.396 3.24,1.594 0.313,0.198 10 false *5 1.417,0.24 1.729,0.438 0.313,0.198 10 false *1 0.76,0.49 1.073,0.688 0.313,0.198 10 false *2
*1 Common-rail Assembly *2 Fuel Pressure Sensor
*3 Pressure Discharge Valve *4 Branch Hole
*5 Main Hole - -
V100135

From Supply Pump
V100136

To Injector Assembly
V100137

To Fuel Tank (Excess Pressure) - -


HINT:
·

The fuel pressure sensor has its sealing portion plastic-deformed in order to keep sealing performance, so do not reuse it after disassembling.

·

If parts that affect the alignment have been changed, make sure to replace the pipe with a new one as well. The parts that require the replacement of a pipe are listed below:

·

Injection pipe: injector, common-rail, and cylinder head

·

Fuel inlet pipe: supply pump, common-rail, cylinder block, cylinder head, cylinder head gasket and timing gear case


·

For details, refer to the Repair Manual.