Home › Engine / Hybrid System › 2KD-FTV EMISSION CONTROL › EMISSION CONTROL SYSTEM › 2011.10–2012.04
NM1840EF _51 Engine / Hybrid System _010313 2KD-FTV EMISSION CONTROL _0055238 EMISSION CONTROL SYSTEM CO CONTROL F

2KD-FTV EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the emission control system are as follows:

Component Quantity Function
Oxidation Catalyst*1 1 Cleans the exhaust gas particulates, HC and CO.
ECM 1 Controls the emission control system based on signals from each sensor.
Electric EGR Control Valve Assembly*2 1 Actuated by the ECM via the E-VRV, this valve controls the flow rate of EGR gas.
EGR Valve Position Sensor (Built into Electric EGR Control Valve Assembly)*2 1 Detects the EGR valve position.
Diesel Throttle Valve 1 Actuated by the ECM, this valve controls the flow rate of EGR gas.
EGR Cooler*3 1 Cools EGR gas.
No. 2 EGR Valve Assembly (EGR Cooler Bypass Switching Valve)*3 1 Switches the flow passage of EGR gas in 2 stages.

*1: Models compliant with EURO 4, EURO 3 and Tier 1 emission regulations and models for high altitude countries

*2: Models compliant with EURO 4, EURO 3, EURO 2, EURO 1 and Tier 1 emission regulations

*3: Models compliant with EURO 4 emission regulations