Home › Engine / Hybrid System › 2KD-FTV EMISSION CONTROL › EMISSION CONTROL SYSTEM › from 2012.04
NM1840EF _51 Engine / Hybrid System _010313 2KD-FTV EMISSION CONTROL _0055238 EMISSION CONTROL SYSTEM DE DETAILS F

2KD-FTV EMISSION CONTROL  EMISSION CONTROL SYSTEM  DETAILS  EXHAUST FUEL ADDITION INJECTOR  


CONSTRUCTION


a.

An exhaust fuel addition injector is installed on the turbine outlet elbow after the turbocharger. This injector supplies additional fuel into the turbine outlet elbow and maintains the proper catalyst temperature for the purpose of PM recovery.


b.

An exhaust fuel addition injector assembly consists of a needle valve body, a needle valve, and a solenoid valve.

W100363
3.688,1.917 3.094,1.917 true 3.635,2.5 3.094,2.5 true 3.49,1.177 3.104,1.177 true 2.917,1.104 3.167,1.469 0.25,0.365 10 false *1 2.917,1.833 3.167,2.198 0.25,0.365 10 false *2 2.917,2.417 3.167,2.781 0.25,0.365 10 false *3
*1 Solenoid Valve *2 Needle Valve
*3 Needle Valve Body - -