CONSTRUCTION
An oxidation catalyst is used to clean the exhaust gas particulates, HC, and CO. The table below describes the location of the catalyst:
| Emission Regulations or Destination | Location of Catalyst | |
|---|---|---|
| Integrated with Front Exhaust Pipe | Below Exhaust Manifold | |
| EURO 4 | ○ | - |
| EURO 3 | - | ○ |
| EURO 2 | - | - |
| EURO 1 | - | - |
| Tier 1 | - | ○ |
| High Altitude Countries | ○ | - |
| Non-compliant with Emission Regulation
(Except High Altitude Countries) |
- | - |
| *A | Models Compliant with EURO 4 Emission Regulations | *B | Models for High Altitude Countries |
| *C | Models Compliant with EURO 3 Emission Regulations | - | - |
| *1 | Front Exhaust Pipe Assembly | *2 | Oxidation Catalyst |
| *3 | Exhaust Manifold Converter Sub-assembly | - | - |