Home › Engine / Hybrid System › 2TR-FE EMISSION CONTROL › EMISSION CONTROL SYSTEM
NM1840EF _51 Engine / Hybrid System _010310 2TR-FE EMISSION CONTROL _0055235 EMISSION CONTROL SYSTEM CO CONTROL F

2TR-FE EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  AIR INJECTION CONTROL  


FUNCTION


a.

To ensure the proper warm-up performance of the Three-Way Catalytic converters (TWCs) after starting a cold engine, an air injection system is used.


b.

This system consists of an air pump, an air switching valve, and an air injection control driver.


c.

The ECM estimates the amount of air injected to the TWCs based on signals from the intake mass air flow meter sub-assembly in order to regulate the air injection time.