CONSTRUCTION
An intake manifold provided with an air intake chamber is used in order to reduce the swirl variances between the cylinders.
A vacuum-actuated swirl control valve is provided in one of the 2 intake ports provided for each cylinder. The swirl control valve consists of a stainless steel shaft and an actuator, which are integrated in the valve. The swirl control valve with 3-stage*1 or 2-stage*2 control is used.
*1: Models compliant with EURO 4 emission regulations
*2: Except models compliant with EURO 4 emission regulations
| *1 | Intake Manifold | *2 | Actuator |
| *3 | Swirl Control Valve | - | - |
| *1 | Intake Manifold | *2 | Actuator |
| *3 | Swirl Control Valve | - | - |