CONSTRUCTION
An air-cooled intercooler is used in order to lower the intake air temperature, improve engine performance, and achieve cleaner exhaust gas emissions. It is located directly on top of the engine.
The intercooler and the inlet tank are made of aluminum and the outlet tank is made of plastic for weight reduction.
A dual construction, high-frequency cavity resonator is used for the pipe between the turbocharger and the intercooler.
| *1 | Intercooler Assembly | *2 | Inlet Tank |
| *3 | Outlet Tank | *4 | High-frequency Cavity Resonator |
| *a | View from Top Side | *b | View from Front Side |
|
Front | - | - |
| *1 | Intercooler Assembly | *2 | Inlet Tank |
| *3 | Outlet Tank | *4 | High-frequency Cavity Resonator |
| *a | View from Top Side | *b | View from Front Side |
|
Front | - | - |