Home › Drivetrain › A340F AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM
NM1840EF _52 Drivetrain _010336 A340F AUTOMATIC TRANSMISSION / TRANSAXLE _0055266 AUTOMATIC TRANSMISSION SYSTEM DE DETAILS F

A340F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  DETAILS  SPEED SENSOR  


CONSTRUCTION


a.

This automatic transmission uses an input speed sensor (for NCO signal) and an output speed sensor (for SP2 signal). Thus, the TCM can detect the timing of the shifting of the gears and appropriately control the engine torque and hydraulic pressure in response to various conditions.


b.

These speed sensors are the pick-up coil type.


c.

The input speed sensor detects the input speed of the transmission. The overdrive direct clutch drum is used as the timing rotor for this sensor.


d.

The output speed sensor detects the speed of the output shaft.

X105564
3.698,3.135 3.292,2.385 true 5,2.573 4.635,1.813 true 4.24,1.698 3.979,0.948 true 2.979,1.615 2.719,0.875 true 3.698,3.146 3.99,3.406 0.292,0.26 10 false *2 4.958,2.594 5.25,2.854 0.292,0.26 10 false *3 3.844,0.781 4.135,1.042 0.292,0.26 10 false *4 2.583,0.708 2.875,0.969 0.292,0.26 10 false *1
*1 Overdrive Direct Clutch Drum *2 Input Speed Sensor
*3 Output Speed Sensor *4 Output Shaft