Home › Drivetrain › A343E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM
NM1840EF _52 Drivetrain _010337 A343E AUTOMATIC TRANSMISSION / TRANSAXLE _0055267 AUTOMATIC TRANSMISSION SYSTEM DE DETAILS F

A343E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  DETAILS  SPEED SENSOR  


CONSTRUCTION


a.

This automatic transmission uses an input speed sensor (for NCO signal) and an output speed sensor (for SP2 signal). Thus, the ECM can detect the timing of the shifting of the gears and appropriately control the engine torque and hydraulic pressure in response to various conditions.


b.

These speed sensors are the pick-up coil type.


c.

The input speed sensor detects the input speed of the transmission. The overdrive direct clutch drum is used as the timing rotor for this sensor.


d.

The output speed sensor detects the speed of the output shaft.

X105567
3.698,3.125 3.292,2.375 true 5.042,2.5 4.677,1.75 true 4.26,1.698 4,0.948 true 2.99,1.594 2.729,0.854 true 3.656,3.156 3.948,3.417 0.292,0.26 10 false *2 5.01,2.531 5.302,2.792 0.292,0.26 10 false *3 3.917,0.76 4.208,1.021 0.292,0.26 10 false *4 2.646,0.667 2.938,0.927 0.292,0.26 10 false *1
*1 Overdrive Direct Clutch Drum *2 Input Speed Sensor
*3 Output Speed Sensor *4 Output Shaft