Home › Drivetrain › A750F AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM › from 2012.04
NM1840EF _52 Drivetrain _010339 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0055269 AUTOMATIC TRANSMISSION SYSTEM DE DETAILS F

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  DETAILS  ATF FILLING PROCEDURE  


CONSTRUCTION


a.

An ATF filling procedure is used in order to improve the accuracy of the ATF level when the transmission is being repaired or replaced. As a result, the oil filler tube and the oil level gauge used in the conventional automatic transmission have been discontinued, eliminating the need to inspect the fluid level as a part of routine maintenance. For details about the ATF filling procedures, refer to the Repair Manual.


b.

This filling procedure uses a refill plug, overflow plug, No. 2 ATF temperature sensor, and shift position indicator D.

X105625
3.542,3.26 3.406,3.594 true 4.156,3.104 4.302,3.469 true 3.24,3.521 3.531,3.781 0.292,0.26 10 false *2 3.01,1.24 3.302,1.5 0.292,0.26 10 false *1 4.385,3.469 4.677,3.729 0.292,0.26 10 false *a
*1 Refill Plug *2 Overflow Plug
*a Proper Level - -