CONSTRUCTION
The A.D.D. shift actuator assembly contains an A.D.D. shift motor, A.D.D. motor limit switch and A.D.D. position switch. It should not be disassembled.
| *1 | A.D.D. Motor Limit Switch | *2 | A.D.D. Position Switch |
| *3 | A.D.D. Shift Motor | - | - |
The A.D.D. motor limit switch has 2 contact point switches (DL1, DL2). Different combinations of the 2 contact point switches and A.D.D. position switch (ADD) allow detection of the A.D.D. state (On or Off).
OPERATION
From 2WD (H2) to 4WD (H4)
When the transfer shift lever turns to H4 position, a signal is input into the 4WD control ECU, and the 4WD control ECU actuates the A.D.D. shift motor.
The operation of the A.D.D. shift motor causes the A.D.D. shift fork and sleeve to move towards the front differential, thus engaging the front drive shaft and the front differential. As a result, the drive force from the transfer is transmitted to the front wheels.
| *1 | Transfer | *2 | Sleeve |
| *3 | A.D.D. Shift Motor | *4 | 4WD Control ECU |
| *5 | A.D.D. Shift Fork | - | - |
| *a | A.D.D. Position Switch Signal | *b | Limit Switch Signal |
| *c | Motor Actuate Signal | - | - |
|
Movement | - | - |
From 4WD (H4) to 2WD (H2)
When the transfer shift lever turns to H2 position, a signal is input into the 4WD control ECU, and the 4WD control ECU actuates the A.D.D. shift motor.
The operation of the A.D.D. shift motor causes the A.D.D. shift fork and sleeve to move towards the front wheels, thus freeing the engagement of the front drive shaft and the front differential. This prevents the front differential and the front propeller shaft from being rotated by the front wheels while the vehicle is being driven.
| *1 | Transfer | *2 | Sleeve |
| *3 | A.D.D. Shift Motor | *4 | 4WD Control ECU |
| *5 | A.D.D. Shift Fork | - | - |
| *a | A.D.D. Position Switch Signal | *b | Limit Switch Signal |
| *c | Motor Actuate Signal | - | - |
|
Movement | - | - |