Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL SYSTEM › from 2012.10
NM1840EF _52 Drivetrain _010349 AXLE AND DIFFERENTIAL _0055281 DIFFERENTIAL SYSTEM DE DETAILS F

AXLE AND DIFFERENTIAL  DIFFERENTIAL SYSTEM  DETAILS  DIFFERENTIAL LOCK SHIFT ACTUATOR AND REAR DIFFERENTIAL LOCK POSITION SWITCH  


CONSTRUCTION


a.

By rotating the rear differential lock shift motor clockwise or counterclockwise in accordance with a signal from the rear differential lock ECU, the rear differential lock shift fork shaft is transferred to switch the rear differential between free and lock.


b.

The rear differential lock limit switch, provided in the differential lock shift actuator, detects the position of the rear differential lock shift motor.


c.

The rear differential lock position switch, provided on the rear differential carrier sub-assembly, detects that the rear differential lock shift fork is in the lock position.

X104724
2.615,3.281 3.031,2.698 true 3.948,3.385 3.51,2.198 true 5.229,2.969 4.802,2.302 true 3.427,1.469 2.698,1.01 true 4.177,1.406 4.813,0.813 true 2.51,0.885 2.792,1.135 0.281,0.25 10 false *1 2.448,3.271 2.729,3.521 0.281,0.25 10 false *2 3.917,3.396 4.198,3.646 0.281,0.25 10 false *3 5.24,2.969 5.521,3.219 0.281,0.25 10 false *4 4.844,0.677 5.125,0.927 0.281,0.25 10 false *5
*1 Rear Differential Lock Shift Motor *2 Rear Differential Carrier Sub-assembly
*3 Rear Differential Lock Limit Switch *4 Rear Differential Lock Shift Fork
*5 Rear Differential Lock Position Switch - -


X104725
0.083,0.146 2.646,0.469 2.563,0.323 10 false Free-lock Switching Detection Signal 3.135,0.177 3.604,0.49 0.469,0.313 10 false Free 4.99,0.167 5.49,0.479 0.5,0.313 10 false Lock 0.958,0.656 1.448,1.01 0.49,0.354 10 false RLY1 0.958,1.427 1.448,1.781 0.49,0.354 10 false RLY2 1.583,0.438 1.948,0.75 0.365,0.313 10 false Off 1.594,1.219 1.958,1.531 0.365,0.313 10 false Off 1.583,0.823 1.854,1.135 0.271,0.313 10 false On 1.583,1.615 1.854,1.927 0.271,0.313 10 false On 0.958,2.24 1.448,2.552 0.49,0.313 10 false RLP 1.583,2.052 1.948,2.365 0.365,0.313 10 false Off 1.583,2.438 1.854,2.792 0.271,0.354 10 false On



OPERATION


a.

Free-lock Switching of Rear Differential

i.

When the rear differential lock control switch is turned on, the rear differential lock ECU outputs drive voltage to the rear differential lock shift motor (M1), and moves the rear differential lock shift fork to the lock side. At this time, the rear differential lock ECU uses the rear differential lock limit switch (RLY1, RLY2) to detect the position of the rear differential lock shift motor, and uses the rear differential lock position switch (RLP) to detect the lock position of the rear differential lock shift fork. When the lock position is reached, the rear differential lock ECU stops the output of drive voltage. Also, it causes the rear differential lock indicator light to flash while switching the rear differential between free and lock, and turns on the light after the operation has been completed.


ii.

When the differential lock switch is turned off, the rear differential lock ECU outputs drive voltage to the rear differential lock shift motor (M2), and moves the rear differential lock shift fork to the free side. When the free position is reached, drive voltage output is stopped and the rear differential lock indicator light is extinguished.

X104726
2.323,1.292 1.865,1.844 true 6.083,3.385 5.396,2.667 true 6.479,2.333 5.813,1.958 true 2.24,3.552 2.896,4.24 true 5.698,1.5 6.375,1.063 true 2.354,1.167 2.51,1.344 0.156,0.177 10 false *1 2.938,4.208 3.219,4.458 0.281,0.25 10 false *2 6.396,0.927 6.677,1.177 0.281,0.25 10 false *4 6.521,2.292 6.802,2.542 0.281,0.25 10 false *3 6.063,3.417 6.344,3.667 0.281,0.25 10 false *1
*1 Rear Differential Lock Shift Fork *2 Rear Differential Lock Limit Switch
*3 Rear Differential Lock Position Switch *4 Rear Differential Lock Shift Motor
V100135

Free Side
V100136

Lock Side