Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › 2011.10–2013.10
NM1840EF _54 Brake _010353 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0055285 BRAKE CONTROL SYSTEM DE DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  DETAILS  BRAKE ACTUATOR  


CONSTRUCTION


a.

Models without VSC

i.

The brake actuator assembly consists of an actuator portion and skid control ECU.

X105312
1.917,1.167 2.76,1.167 true 4.333,1.583 5.135,1.583 true 1.75,1.083 2.156,1.417 0.406,0.333 10 false *1 5.177,1.5 5.583,1.833 0.406,0.333 10 false *2
*1 Skid Control ECU *2 Actuator Portion



ii.

The actuator portion consists of 3 pressure holding solenoid valves, 3 pressure reduction solenoid valves, 2 pumps and 2 reservoirs.

X105313
3.458,2.906 3.76,2.625 3.76,2.625 4.052,2.906 true 4.198,4.281 4.479,4.281 true 3.031,4.281 3.313,4.281 true 1.531,2.417 2.01,2.667 0.479,0.25 10 false *1 2.667,2.417 3.146,2.667 0.479,0.25 10 false *1 4.667,2.417 5.146,2.667 0.479,0.25 10 false *1 1.563,3.76 2.042,4.01 0.479,0.25 10 false *2 2.729,3.76 3.208,4.01 0.479,0.25 10 false *2 4.677,3.76 5.156,4.01 0.479,0.25 10 false *2 3.677,2.438 4.156,2.688 0.479,0.25 10 false *3 4.531,4.188 5.01,4.438 0.479,0.25 10 false *4 2.854,4.198 3.333,4.448 0.479,0.25 10 false *4 3.5,0.25 3.979,0.5 0.479,0.25 10 false *a 4.646,0.24 5.125,0.49 0.479,0.25 10 false *a 1,5.292 1.479,5.542 0.479,0.25 10 false *b 2.125,5.292 2.604,5.542 0.479,0.25 10 false *c 4.708,5.292 5.188,5.542 0.479,0.25 10 false *d 6.292,5.292 6.771,5.542 0.479,0.25 10 false *e 5.469,4.677 5.948,4.927 0.479,0.25 10 false *5
*1 Pressure Holding Solenoid Valve *2 Pressure Reduction Solenoid Valve
*3 Pump *4 Reservoir
*5 Brake Control Valve - -
*a From Master Cylinder *b Front Brake LH
*c Front Brake RH *d Rear Brake LH
*e Rear Brake RH - -




b.

Models with VSC

i.

The brake actuator assembly consists of an actuator portion and skid control ECU.

X105314
1.74,1.208 2.729,1.208 true 4.469,1.719 5.406,1.719 true 1.552,1.146 1.958,1.479 0.406,0.333 10 false *1 5.469,1.625 5.875,1.958 0.406,0.333 10 false *2
*1 Skid Control ECU *2 Actuator Portion



ii.

The actuator portion consists of 2 master cylinder cut solenoid valves, 4 pressure holding solenoid valves, 4 pressure reduction solenoid valves, 2 pumps, 2 reservoirs, and a master cylinder pressure sensor.

X105315
1.75,0.688 2.104,0.688 true 3.24,2.885 3.583,2.417 3.583,2.417 3.948,2.885 true 3.26,4.844 3.604,5.323 3.604,5.323 3.969,4.844 true 1.177,0.167 1.479,0.417 0.302,0.25 10 false *a 5.844,0.167 6.146,0.417 0.302,0.25 10 false *a 2.115,0.573 2.521,0.906 0.406,0.333 10 false *1 1.375,1.99 1.781,2.323 0.406,0.333 10 false *2 5.708,1.969 6.115,2.302 0.406,0.333 10 false *2 1.625,3.167 2.031,3.5 0.406,0.333 10 false *3 2.479,3.156 2.885,3.49 0.406,0.333 10 false *3 4.583,3.167 4.99,3.5 0.406,0.333 10 false *3 5.448,3.167 5.854,3.5 0.406,0.333 10 false *3 1.604,4.271 2.01,4.604 0.406,0.333 10 false *4 2.469,4.26 2.875,4.594 0.406,0.333 10 false *4 4.573,4.26 4.979,4.594 0.406,0.333 10 false *4 5.448,4.26 5.854,4.594 0.406,0.333 10 false *4 3.51,2.24 3.917,2.573 0.406,0.333 10 false *5 3.521,5.354 3.927,5.688 0.406,0.333 10 false *6 1.198,5.344 1.604,5.677 0.406,0.333 10 false *b 2.917,5.292 3.323,5.625 0.406,0.333 10 false *c 4.167,5.313 4.573,5.646 0.406,0.333 10 false *d 5.875,5.302 6.281,5.635 0.406,0.333 10 false *e
*1 Master Cylinder Pressure Sensor *2 Master Cylinder Cut Solenoid Valve
*3 Pressure Holding Solenoid Valve *4 Pressure Reduction Solenoid Valve
*5 Pump *6 Reservoir
*a From Master Cylinder *b Rear Brake LH
*c Rear Brake RH *d Front Brake LH
*e Front Brake RH - -





OPERATION


a.

ABS (Models without VSC)

i.

Based on the signals received from the 4 speed sensors and deceleration sensor, the skid control ECU calculates the speed of each wheel and the deceleration, and checks the wheel slipping conditions. In accordance with the slipping condition, the skid control ECU controls each solenoid valve in the brake actuator in order to adjust the fluid pressure of each wheel cylinder in the following 3 modes: pressure increase, pressure holding, and pressure reduction modes.

X105320
2.74,1.167 3.552,1.167 true 2.729,2.563 3.542,2.563 true 6.292,3.365 6.635,3.667 0.344,0.302 10 false *e 5.823,0.25 6.167,0.552 0.344,0.302 10 false *c 3.552,0.25 3.896,0.552 0.344,0.302 10 false *b 2.573,2.479 2.917,2.781 0.344,0.302 10 false *4 1.219,3.208 1.563,3.51 0.344,0.302 10 false *2 1.229,1.792 1.573,2.094 0.344,0.302 10 false *1 2.573,1.073 2.917,1.375 0.344,0.302 10 false *3 1.313,0.25 1.656,0.552 0.344,0.302 10 false *a 1.75,3.365 2.094,3.667 0.344,0.302 10 false *d
*1 Pressure Holding Solenoid Valve *2 Pressure Reduction Solenoid Valve
*3 Port A *4 Port B
*a Pressure Increase Mode *b Pressure Holding Mode
*c Pressure Reduction Mode *d To Brake Caliper or Wheel Cylinder
*e From Brake Caliper or Wheel Cylinder - -


Brake Actuator Operation in ABS
Pressure Mode Increase Mode Holding Mode Reduction Mode
Pressure Holding Solenoid Valve (Port A) Off (Open) On (Closed) ←
Pressure Reduction Solenoid Valve (Port B) Off (Closed) ← On (Open)
Wheel Cylinder Pressure Increases Holds Reduces



b.

ABS and EBD (Models with VSC)

i.

Based on the signals received from the 4 speed sensors and yaw rate sensor assembly, the skid control ECU calculates the speed of each wheel and deceleration, and checks the wheel slipping conditions. In accordance with the slipping condition, the skid control ECU controls each solenoid valve in the brake actuator in order to adjust the fluid pressure of each wheel cylinder in the following 3 modes: pressure increase, pressure holding, and pressure reduction modes.

X105320
2.74,1.167 3.552,1.167 true 2.729,2.563 3.542,2.563 true 6.292,3.365 6.635,3.667 0.344,0.302 10 false *e 5.823,0.25 6.167,0.552 0.344,0.302 10 false *c 3.552,0.25 3.896,0.552 0.344,0.302 10 false *b 2.573,2.479 2.917,2.781 0.344,0.302 10 false *4 1.219,3.208 1.563,3.51 0.344,0.302 10 false *2 1.229,1.792 1.573,2.094 0.344,0.302 10 false *1 2.573,1.073 2.917,1.375 0.344,0.302 10 false *3 1.313,0.25 1.656,0.552 0.344,0.302 10 false *a 1.75,3.365 2.094,3.667 0.344,0.302 10 false *d
*1 Pressure Holding Solenoid Valve *2 Pressure Reduction Solenoid Valve
*3 Port A *4 Port B
*a Pressure Increase Mode *b Pressure Holding Mode
*c Pressure Reduction Mode *d To Brake Caliper or Wheel Cylinder
*e From Brake Caliper or Wheel Cylinder - -


Brake Actuator Operation in ABS and EBD
Pressure Mode Increase Mode Holding Mode Reduction Mode
Pressure Holding Solenoid Valve (Port A) Off (Open) On (Closed) ←
Pressure Reduction Solenoid Valve (Port B) Off (Closed) ← On (Open)
Wheel Cylinder Pressure Increases Holds Reduces



c.

Brake Assist

i.

In the event of emergency braking, the skid control ECU determines the driver's intention based on the speed of the pressure increase in the master cylinder determined by the master cylinder pressure sensor signal. If the skid control ECU judges the need for additional brake assist, pressure is generated by the pump in the brake actuator and directed to the wheel cylinder to apply a large amount of fluid pressure.

X105321
0.698,0.281 2.635,0.677 1.938,0.396 10 false Front Speed Sensor RH 0.719,0.917 2.656,1.313 1.938,0.396 10 false Front Speed Sensor LH 0.719,1.542 2.656,1.938 1.938,0.396 10 false Rear Speed Sensor RH 0.708,2.177 2.646,2.573 1.938,0.396 10 false Rear Speed Sensor LH 0.625,2.792 2.688,3.188 2.063,0.396 10 false Stop Light Switch Assembly 0.385,3.438 2.625,3.833 2.24,0.396 10 false Brake Pedal Load Sensing Switch 5.229,0.271 6.938,0.667 1.708,0.396 10 false Solenoid Valves 5.344,0.927 6.917,1.323 1.573,0.396 10 false Pump Motor 0.396,4.052 2.615,4.448 2.219,0.396 10 false Master Cylinder Pressure Sensor 4.802,1.563 6.906,1.958 2.104,0.396 10 false Combination Meter Assembly 5.177,2.167 6.792,2.563 1.615,0.396 10 false ABS Warning Light 3.188,2.125 3.969,2.76 0.781,0.635 10 false Skid Control ECU

X105322
6.438,3.781 5.521,3.781 true 6.448,2.688 5.531,2.677 true 4.271,1.958 4.625,2.646 true 4.625,3.792 5.042,4.698 true 0.74,3.771 1.656,3.771 true 0.74,2.698 1.656,2.698 true 0.74,1.5 1.396,1.5 true 5.75,1.479 6.406,1.479 true 2.896,1.969 2.542,2.656 true 2.521,3.781 2.104,4.677 true 6.5,3.656 6.771,3.917 0.271,0.26 10 false (J) 5.385,4.313 5.688,4.573 0.302,0.26 10 false (10) 4.521,4.281 4.792,4.542 0.271,0.26 10 false (9) 5.427,3.208 5.698,3.469 0.271,0.26 10 false (6) 6.5,2.594 6.771,2.854 0.271,0.26 10 false (F) 5.688,2.021 5.958,2.281 0.271,0.26 10 false (2) 4.083,1.802 4.354,2.063 0.271,0.26 10 false (E) 4.552,3.208 4.823,3.469 0.271,0.26 10 false (5) 5.073,4.698 5.344,4.958 0.271,0.26 10 false (I) 0.51,3.677 0.781,3.938 0.271,0.26 10 false (G) 2.469,4.281 2.74,4.542 0.271,0.26 10 false (8) 1.594,4.313 1.865,4.573 0.271,0.26 10 false (7) 2.469,3.219 2.74,3.479 0.271,0.26 10 false (4) 0.521,2.625 0.792,2.885 0.271,0.26 10 false (C) 0.521,1.406 0.792,1.667 0.271,0.26 10 false (A) 6.458,1.365 6.729,1.625 0.271,0.26 10 false (B) 1.344,2.042 1.615,2.302 0.271,0.26 10 false (1) 2.906,1.76 3.177,2.021 0.271,0.26 10 false (D) 1.594,3.219 1.865,3.479 0.271,0.26 10 false (3) 2,4.698 2.271,4.958 0.271,0.26 10 false (H) 1.177,5.333 1.448,5.594 0.271,0.26 10 false *a 2.875,5.333 3.146,5.594 0.271,0.26 10 false *b 4.156,5.333 4.427,5.594 0.271,0.26 10 false *c 5.865,5.323 6.135,5.583 0.271,0.26 10 false *d

Brake Actuator Operation in Brake Assist
Item Brake Assist Not Activated Brake Assist Activated
Pump Off On
Master Cylinder Cut Solenoid Valve (1) Port (A) Off (Open) On*
(2) Port (B) Off (Open) On*
Pressure Holding Solenoid Valve (3) Port (C) Off (Open) ←
(4) Port (D) Off (Open) ←
(5) Port (E) Off (Open) ←
(6) Port (F) Off (Open) ←
Pressure Reduction Solenoid Valve (7) Port (G) Off (Closed) ←
(8) Port (H) Off (Closed) ←
(9) Port (I) Off (Closed) ←
(10) Port (J) Off (Closed) ←

HINT:

*: The solenoid valve switches the hydraulic pressure between open and closed in accordance with the operating conditions by adjusting continually.




d.

TRC

i.

The fluid pressure generated by the pump is regulated by the master cylinder cut solenoid valve to the required pressure. Thus, the wheel cylinders of the drive wheels are controlled in the following 3 modes: pressure increase, pressure holding, and pressure reduction modes to control the slippage of the drive wheels. The pressure holding solenoid valve and the pressure reduction solenoid valve are turned on or off in accordance with the ABS and EBD operation patterns.

X105323
0.708,0.313 2.646,0.708 1.938,0.396 10 false Front Speed Sensor RH 0.698,0.938 2.635,1.333 1.938,0.396 10 false Front Speed Sensor LH 0.719,1.563 2.656,1.958 1.938,0.396 10 false Rear Speed Sensor RH 0.729,2.208 2.667,2.604 1.938,0.396 10 false Rear Speed Sensor LH 0.604,2.833 2.667,3.229 2.063,0.396 10 false Stop Light Switch Assembly 0.781,3.458 2.635,3.854 1.854,0.396 10 false Parking Brake Switch 5.208,0.313 6.917,0.708 1.708,0.396 10 false Solenoid Valves 5.354,0.958 6.927,1.354 1.573,0.396 10 false Pump Motor 0.906,4.104 2.635,4.5 1.729,0.396 10 false VSC OFF Switch 4.813,1.583 6.917,1.979 2.104,0.396 10 false Combination Meter Assembly 5.229,2.219 6.823,2.615 1.594,0.396 10 false Slip Indicator Light 5.042,2.708 6.813,3.104 1.771,0.396 10 false VSC OFF Indicator Light 3.188,2.75 3.969,3.396 0.781,0.646 10 false Skid Control ECU 0.396,4.719 2.646,5.115 2.25,0.396 10 false Brake Pedal Load Sensing Switch 0.406,5.365 2.635,5.76 2.229,0.396 10 false Master Cylinder Pressure Sensor 5.573,3.594 6.958,3.99 1.385,0.396 10 false DLC3 4.875,4.344 6.938,4.74 2.063,0.396 10 false Yaw Rate Sensor Assembly 5.021,5.094 6.906,5.49 1.885,0.396 10 false Steering Angle Sensor 5.594,5.875 6.708,6.271 1.115,0.396 10 false ECM

X105322
6.438,3.781 5.521,3.781 true 6.448,2.688 5.531,2.677 true 4.271,1.958 4.625,2.646 true 4.625,3.792 5.042,4.698 true 0.74,3.771 1.656,3.771 true 0.74,2.698 1.656,2.698 true 0.74,1.5 1.396,1.5 true 5.75,1.479 6.406,1.479 true 2.896,1.969 2.542,2.656 true 2.521,3.781 2.104,4.677 true 6.5,3.656 6.771,3.917 0.271,0.26 10 false (J) 5.385,4.313 5.688,4.573 0.302,0.26 10 false (10) 4.521,4.281 4.792,4.542 0.271,0.26 10 false (9) 5.427,3.208 5.698,3.469 0.271,0.26 10 false (6) 6.5,2.594 6.771,2.854 0.271,0.26 10 false (F) 5.688,2.021 5.958,2.281 0.271,0.26 10 false (2) 4.083,1.802 4.354,2.063 0.271,0.26 10 false (E) 4.552,3.208 4.823,3.469 0.271,0.26 10 false (5) 5.073,4.698 5.344,4.958 0.271,0.26 10 false (I) 0.51,3.677 0.781,3.938 0.271,0.26 10 false (G) 2.469,4.281 2.74,4.542 0.271,0.26 10 false (8) 1.594,4.313 1.865,4.573 0.271,0.26 10 false (7) 2.469,3.219 2.74,3.479 0.271,0.26 10 false (4) 0.521,2.625 0.792,2.885 0.271,0.26 10 false (C) 0.521,1.406 0.792,1.667 0.271,0.26 10 false (A) 6.458,1.365 6.729,1.625 0.271,0.26 10 false (B) 1.344,2.042 1.615,2.302 0.271,0.26 10 false (1) 2.906,1.76 3.177,2.021 0.271,0.26 10 false (D) 1.594,3.219 1.865,3.479 0.271,0.26 10 false (3) 2,4.698 2.271,4.958 0.271,0.26 10 false (H) 1.177,5.333 1.448,5.594 0.271,0.26 10 false *a 2.875,5.333 3.146,5.594 0.271,0.26 10 false *b 4.156,5.333 4.427,5.594 0.271,0.26 10 false *c 5.865,5.323 6.135,5.583 0.271,0.26 10 false *d

Brake Actuator Operation in TRC
Item Not Activated TRC Operation
Pressure Increase Mode Pressure Holding Mode Pressure Reduction Mode
Pump Off On ← ←
Master Cylinder Cut Solenoid Valve (1) Port (A) Off (Open) On* ← ←
(2) Port (B) Off (Open) On* ← ←
Front Brake Pressure Holding Solenoid Valve (5) Port (E) Off (Open) ← On (Closed) ←
(6) Port (F) Off (Open) ← On (Closed) ←
Pressure Reduction Solenoid Valve (9) Port (I) Off (Closed) ← ← On (Open)
(10) Port (J) Off (Closed) ← ← On (Open)
Wheel Cylinder Pressure *d Right - Increases Holds Reduces
*c Left - Increases Holds Reduces
Rear Brake Pressure Holding Solenoid Valve (3) Port (C) Off (Open) ← On (Closed) ←
(4) Port (D) Off (Open) ← On (Closed) ←
Pressure Reduction Solenoid Valve (7) Port (G) Off (Closed) ← ← On (Open)
(8) Port (H) Off (Closed) ← ← On (Open)
Wheel Cylinder Pressure *b Right - Increases Holds Reduces
*a Left - Increases Holds Reduces

HINT:

*: The solenoid valve switches the hydraulic pressure between open and closed in accordance with the operating conditions by adjusting continually.




e.

VSC

i.

The VSC, by way of solenoid valves, controls the fluid pressure generated by the pump and applies it to the brake wheel cylinder of each wheel in the following 3 modes: pressure increase, pressure holding, and pressure reduction modes. As a result, the tendency to front wheel skid or rear wheel skid is controlled.

X105323
0.708,0.313 2.646,0.708 1.938,0.396 10 false Front Speed Sensor RH 0.698,0.938 2.635,1.333 1.938,0.396 10 false Front Speed Sensor LH 0.719,1.563 2.656,1.958 1.938,0.396 10 false Rear Speed Sensor RH 0.729,2.208 2.667,2.604 1.938,0.396 10 false Rear Speed Sensor LH 0.604,2.833 2.667,3.229 2.063,0.396 10 false Stop Light Switch Assembly 0.781,3.458 2.635,3.854 1.854,0.396 10 false Parking Brake Switch 5.208,0.313 6.917,0.708 1.708,0.396 10 false Solenoid Valves 5.354,0.958 6.927,1.354 1.573,0.396 10 false Pump Motor 0.906,4.104 2.635,4.5 1.729,0.396 10 false VSC OFF Switch 4.813,1.583 6.917,1.979 2.104,0.396 10 false Combination Meter Assembly 5.229,2.219 6.823,2.615 1.594,0.396 10 false Slip Indicator Light 5.042,2.708 6.813,3.104 1.771,0.396 10 false VSC OFF Indicator Light 3.188,2.75 3.969,3.396 0.781,0.646 10 false Skid Control ECU 0.396,4.719 2.646,5.115 2.25,0.396 10 false Brake Pedal Load Sensing Switch 0.406,5.365 2.635,5.76 2.229,0.396 10 false Master Cylinder Pressure Sensor 5.573,3.594 6.958,3.99 1.385,0.396 10 false DLC3 4.875,4.344 6.938,4.74 2.063,0.396 10 false Yaw Rate Sensor Assembly 5.021,5.094 6.906,5.49 1.885,0.396 10 false Steering Angle Sensor 5.594,5.875 6.708,6.271 1.115,0.396 10 false ECM


ii.

In the front wheel skid restraining control, the brake of the front wheel on the outer circle of the turn and the brakes of the rear wheels are applied. Also, depending on whether the brake is on or off and also depending on the condition of the vehicle, there are circumstances in which the brake might not be applied to the wheels even if the wheel is targeted for braking. The following diagram shows the hydraulic circuit in the pressure increase mode, as it controls the front wheel skid condition while the vehicle is making a right turn. In other operating modes, the pressure holding valve and the pressure reduction valve are turned on or off in accordance with the ABS and EBD operation patterns.

X105324
6.458,3.781 5.542,3.781 true 6.448,2.688 5.531,2.677 true 4.281,1.979 4.635,2.667 true 4.656,3.771 5.073,4.677 true 0.729,3.771 1.646,3.771 true 0.75,2.677 1.667,2.677 true 0.729,1.49 1.385,1.49 true 5.771,1.49 6.427,1.49 true 2.906,1.969 2.552,2.656 true 2.531,3.781 2.115,4.677 true 6.531,3.708 6.802,3.969 0.271,0.26 10 false (J) 5.385,4.323 5.688,4.583 0.302,0.26 10 false (10) 4.563,4.302 4.833,4.563 0.271,0.26 10 false (9) 5.427,3.208 5.698,3.469 0.271,0.26 10 false (6) 6.531,2.594 6.802,2.854 0.271,0.26 10 false (F) 5.677,2.021 5.948,2.281 0.271,0.26 10 false (2) 4.094,1.771 4.365,2.031 0.271,0.26 10 false (E) 4.552,3.208 4.823,3.469 0.271,0.26 10 false (5) 5.052,4.698 5.323,4.958 0.271,0.26 10 false (I) 0.521,3.688 0.792,3.948 0.271,0.26 10 false (G) 2.479,4.292 2.75,4.552 0.271,0.26 10 false (8) 1.615,4.313 1.885,4.573 0.271,0.26 10 false (7) 2.479,3.208 2.75,3.469 0.271,0.26 10 false (4) 0.521,2.604 0.792,2.865 0.271,0.26 10 false (C) 0.531,1.406 0.802,1.667 0.271,0.26 10 false (A) 6.49,1.396 6.76,1.656 0.271,0.26 10 false (B) 1.333,2.031 1.604,2.292 0.271,0.26 10 false (1) 2.906,1.771 3.177,2.031 0.271,0.26 10 false (D) 1.604,3.219 1.875,3.479 0.271,0.26 10 false (3) 1.958,4.677 2.229,4.938 0.271,0.26 10 false (H) 1.167,5.406 1.438,5.667 0.271,0.26 10 false *a 2.906,5.406 3.177,5.667 0.271,0.26 10 false *b 4.167,5.417 4.438,5.677 0.271,0.26 10 false *c 5.885,5.396 6.156,5.656 0.271,0.26 10 false *d

Brake Actuator Operation in VSC (Front Wheel Skid Restraining)
Item Not Activated VSC Operation
Pressure Increase Mode Pressure Holding Mode Pressure Reduction Mode
Pump Off On ← ←
Master Cylinder Cut Solenoid Valve (1) Port (A) Off (Open) On* ← ←
(2) Port (B) Off (Open) On* ← ←
Front Brake Pressure Holding Solenoid Valve (5) Port (E) Off (Open) ← On (Closed) ←
(6) Port (F) Off (Open) On (Closed) ← ←
Pressure Reduction Solenoid Valve (9) Port (I) Off (Closed) ← ← On (Open)
(10) Port (J) Off (Closed) ← ← ←
Wheel Cylinder Pressure *d Right - - - -
*c Left - Increases Holds Reduces
Rear Brake Pressure Holding Solenoid Valve (3) Port (C) Off (Open) ← On (Closed) ←
(4) Port (D) Off (Open) ← On (Closed) ←
Pressure Reduction Solenoid Valve (7) Port (G) Off (Closed) ← ← On (Open)
(8) Port (H) Off (Closed) ← ← On (Open)
Wheel Cylinder Pressure *b Right - Increases Holds Reduces
*a Left - Increases Holds Reduces

HINT:

*: The solenoid valve switches the hydraulic pressure between open and closed in accordance with the operating conditions by adjusting continually.



iii.

During the rear wheel skid restraining control, the brakes of the front wheel on the outer circle of the turn are applied. Also, depending on whether the brake is on or off and also depending on the condition of the vehicle, there are circumstances in which the brake might not be applied to the wheels even if the wheel is targeted for braking. The following diagram shows the hydraulic circuit in the pressure increase mode, as it controls the rear wheel skid condition while the vehicle is making a right turn. In other operating modes, the pressure holding valve and the pressure reduction valve are turned on or off in accordance with the ABS and EBD operation patterns.

X105325
6.458,3.771 5.542,3.771 true 6.438,2.677 5.521,2.667 true 4.271,1.99 4.625,2.677 true 4.646,3.781 5.063,4.688 true 0.75,3.781 1.667,3.781 true 0.74,2.667 1.656,2.667 true 0.75,1.479 1.406,1.479 true 5.771,1.479 6.427,1.479 true 2.885,1.99 2.531,2.677 true 2.521,3.781 2.104,4.677 true 6.51,3.708 6.781,3.969 0.271,0.26 10 false (J) 5.385,4.302 5.688,4.563 0.302,0.26 10 false (10) 4.583,4.281 4.854,4.542 0.271,0.26 10 false (9) 5.427,3.208 5.698,3.469 0.271,0.26 10 false (6) 6.49,2.625 6.76,2.885 0.271,0.26 10 false (F) 5.677,2.031 5.948,2.292 0.271,0.26 10 false (2) 4.115,1.75 4.385,2.01 0.271,0.26 10 false (E) 4.552,3.198 4.823,3.458 0.271,0.26 10 false (5) 5.063,4.698 5.333,4.958 0.271,0.26 10 false (I) 0.542,3.698 0.813,3.958 0.271,0.26 10 false (G) 2.469,4.281 2.74,4.542 0.271,0.26 10 false (8) 1.594,4.313 1.865,4.573 0.271,0.26 10 false (7) 2.469,3.219 2.74,3.479 0.271,0.26 10 false (4) 0.542,2.583 0.813,2.844 0.271,0.26 10 false (C) 0.542,1.385 0.813,1.646 0.271,0.26 10 false (A) 6.479,1.396 6.75,1.656 0.271,0.26 10 false (B) 1.323,2.031 1.594,2.292 0.271,0.26 10 false (1) 2.885,1.813 3.156,2.073 0.271,0.26 10 false (D) 1.594,3.208 1.865,3.469 0.271,0.26 10 false (3) 2,4.688 2.271,4.948 0.271,0.26 10 false (H) 1.156,5.354 1.427,5.615 0.271,0.26 10 false *a 2.896,5.333 3.167,5.594 0.271,0.26 10 false *b 4.156,5.344 4.427,5.604 0.271,0.26 10 false *c 5.885,5.344 6.156,5.604 0.271,0.26 10 false *d

Brake Actuator Operation in VSC (Rear Wheel Skid Restraining)
Item Not Activated VSC Operation
Pressure Increase Mode Pressure Holding Mode Pressure Reduction Mode
Pump Off On ← ←
Master Cylinder Cut Solenoid Valve (1) Port (A) Off (Open) On* ← ←
(2) Port (B) Off (Open) On* ← ←
Front Brake Pressure Holding Solenoid Valve (5) Port (E) Off (Open) ← On (Closed) ←
(6) Port (F) Off (Open) On (Closed) ← ←
Pressure Reduction Solenoid Valve (9) Port (I) Off (Closed) ← ← On (Open)
(10) Port (J) Off (Closed) ← ← ←
Wheel Cylinder Pressure *d Right - - - -
*c Left - Increases Holds Reduces
Rear Brake Pressure Holding Solenoid Valve (3) Port (C) Off (Open) On (Closed) ← ←
(4) Port (D) Off (Open) On (Closed) ← ←
Pressure Reduction Solenoid Valve (7) Port (G) Off (Closed) ← ← ←
(8) Port (H) Off (Closed) ← ← ←
Wheel Cylinder Pressure *b Right - - - -
*a Left - - - -

HINT:

*: The solenoid valve switches the hydraulic pressure between open and closed in accordance with the operating conditions by adjusting continually.