CONSTRUCTION
A compact and lightweight vane pump, which uses die-cast aluminum as the material for its housing, is used.
A belt drive type vane pump is used on models with the 2TR-FE or 2TR-FBE engine, and a gear drive type vane pump is used on models with the 1KD-FTV or 2KD-FTV engine.
Models with the 2TR-FE or 2TR-FBE engine use a type of vane pump with a built-in reservoir tank.
| *1 | Vane Pump Oil Reservoir Sub-assembly | *2 | Shaft with Pulley |
| *3 | Power Steering Oil Pressure Switch | *4 | Vane Pump Housing |
| *1 | Vane Pump Gear | *2 | Vane Pump Housing |