Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM › 2011.10–2012.10
NM1840EF _55 Steering _010358 POWER ASSIST SYSTEMS _0055290 POWER STEERING SYSTEM DE DETAILS F

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  DETAILS  STEERING GEAR  


CONSTRUCTION


a.

A low friction rack shaft is used in order to achieve a steering operation feeling at the center position.


b.

Steering rack bushes are used to mount the steering gear on the vehicle. Accordingly, the rigidity in the left and right directions has been optimized and the vertical rigidity and the rigidity in the forward and rearward directions have been enhanced to optimize compliance steering and eliminate vibration from the ground.


c.

A check valve is provided at the high pressure port in order to reduce the extent of shocks applied from the road surface.

X105285
1.406,2.99 1.99,2.99 true 0.885,2.281 1.458,2.281 true 2.281,2.729 2.583,2.26 true 5,3 5.406,3.333 0.406,0.333 10 false *4 1.229,2.896 1.635,3.229 0.406,0.333 10 false *2 0.698,2.198 1.104,2.531 0.406,0.333 10 false *1 2.583,2.083 2.99,2.417 0.406,0.333 10 false *3
*1 Check Valve *2 Pinion Gear
*3 Rack Shaft *4 Steering Rack Bush