CONSTRUCTION
An accessory meter assembly is used, which can show the cruise information display.
A sensor that detects the earth's magnetic field is built inside the inside accessory meter assembly. The compass indicates north as 0° and the forward direction of the vehicle using 8 azimuths.
| *1 | INFO. Switch | *2 | Front Passenger Seat Belt Warning Light |
| *3 | RESET Switch | - | - |
The accessory meter assembly has the following functions:
| Function | Outline |
|---|---|
| Clock and Outside Temperature Display | ·
Displays the clock. ·
Displays the outside temperature. |
| Cruise Information Display | In the cruise information display, 6 types of information can be displayed.
·
Average Fuel Consumption ·
Current Fuel Consumption ·
Average Vehicle Speed ·
Elapsed Time ·
Driveable Distance ·
Compass |
| Front Passenger Side Seat Belt Warning | Displays the front passenger seat belt warning light. |
The display of the accessory meter assembly undergoes the following transitions:
| No. | Condition |
|---|---|
| *1 | Pressing the INFO. switch for less than 2.3 seconds |
| *2 | Pressing the RESET switch for less than 0.8 seconds |
| *3 | Pressing the INFO. switch for 2.3 seconds or more |
| No. | Condition |
|---|---|
| *1 | Pressing the INFO. switch for 2.3 seconds or more |
| *2 | Pressing the INFO. switch for less than 2.3 seconds or 6 seconds of no operation |
| *3 | Pressing the RESET switch for less than 0.8 seconds |
| No. | Condition |
|---|---|
| *1 | When a predetermined level of magnetization has not been met for longer than a certain period of time. |
| *2 | When magnetization correction is conducted via automatic correction or circling calibration. |
| *3 | Pressing the INFO. switch for 2.3 seconds or more |
| *4 | Pressing the INFO. switch for less than 2.3 seconds or 6 seconds of no operation |
| *5 | Pressing the RESET switch for less than 0.8 seconds |
| *6 | When the RESET switch has been pressed for less than 0.8 seconds before circling calibration has been completed. |
| *7 | When circling calibration has been conduced correctly. |
| *8 | When circling calibration has not been conducted correctly. |
| *9 | Pressing the INFO. switch for less than 2.3 seconds |
For details of the compass correction mode, refer to the Repair Manual.