CONSTRUCTION
Air Conditioning Control Assembly
A rotary switch type air conditioning control assembly is used.
5 air outlet modes are provided on the control panel on the models with manual air conditioning. To enable finer mode settings, a positive feel is provided between the positions of these modes, thus achieving a high comfort level.
A control cable is used. This cable is circular, and is placed around the cable pulleys that are provided on the air conditioning control assembly and the damper.
The operation effort of the air conditioning control assembly is transmitted to the damper via the control cable, which always moves in the pulling direction. Due to the consistent action point of the pulleys, the fluctuation of the operating effort has been minimized through the use of the pulleys. These measures have ensured ease of use and have reduced the operating effort.
| *1 | Pulley | *2 | Base of Pulley |
| *3 | Control Cable | - | - |
| *a | Air Conditioning Control Assembly Side | *b | Damper Side |
Integration Panel Sub-assembly
An integration panel sub-assembly with Liquid Crystal Display (LCD) is used to ensure excellent visibility.
A push button type integration panel sub-assembly is used.