Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › ECD SYSTEM › from 2012.04
NM1840EF _51 Engine / Hybrid System _010297 1KD-FTV ENGINE CONTROL _0055222 ECD SYSTEM CO CONTROL F

1KD-FTV ENGINE CONTROL  ECD SYSTEM  CONTROL  GLOW PLUG CONTROL  


FUNCTION


a.

Except on the models compliant with EURO 5 and Tier 1.5 emission regulations, the ECM controls the length of time for which the current is applied to the glow plug relay when the engine starts in accordance with engine coolant temperature to control the length of time for which the current is applied to the glow plug assemblies.


b.

On the models compliant with EURO 5 and Tier 1.5 emission regulations, the ECM sends a signal to the glow plug controller, and the glow plug controller independently controls the length of time for which the current is applied to the glow plug assemblies in each cylinder in accordance with engine conditions. By independently and precisely controlling the temperature inside each cylinder, low emissions are achieved.