Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › ECD SYSTEM › from 2012.04
NM1840EF _51 Engine / Hybrid System _010297 1KD-FTV ENGINE CONTROL _0055222 ECD SYSTEM DE DETAILS F

1KD-FTV ENGINE CONTROL  ECD SYSTEM  DETAILS  FUEL PRESSURE SENSOR  


CONSTRUCTION


a.

Except Models Compliant with Tier 1.5 Emission Regulations

i.

The fuel pressure sensor, which is mounted on the common-rail, outputs a signal that represents the fuel pressure in the common-rail to the ECM in order to constantly regulate the fuel at an optimal pressure.


ii.

The fuel pressure sensor consists of a semiconductor which utilizes the characteristics of a silicon chip that changes its electrical resistance when pressure is applied to it.


iii.

The fuel pressure sensor has 2 circuits (main and sub), which enable the ECM to constantly compare the values detected by the 2 circuits. As a result, highly precise values can be detected, which also enables a higher level of fail-safe control.

W112591
2.25,0.938 2.25,0.271 2.25,0.271 2.042,0.271 true 2.531,4.115 2.385,4.115 2.385,4.115 2.229,3.833 true 5.417,2.156 5.25,2.156 5.25,2.156 5.25,1.292 true 5.958,1.656 5.792,1.656 5.792,1.656 5.792,1.323 true 0.667,2.656 0.927,2.885 0.26,0.229 10 false (V) 1.302,1.781 3.906,1.979 2.604,0.198 10 false Fuel Pressure Sensor Cross Section 0.177,2.302 2.781,2.5 2.604,0.198 10 false - Sensor Characteristic - 0.281,2.938 0.792,3.354 0.51,0.417 10 false Output Voltage 1.26,2.833 1.708,3.073 0.448,0.24 10 false Main 1.698,3.25 2.042,3.49 0.344,0.24 10 false Sub 2.521,3.698 3,3.917 0.479,0.219 10 false (MPa) 1.125,3.865 2.125,4.083 1,0.219 10 false Fuel Pressure 2.604,4.031 7.031,4.271 4.427,0.24 10 false 220 MPa (Models Compliant with EURO 5 Emission Regulations) 2.583,4.354 7.031,4.531 4.448,0.177 10 false 190 MPa (Except Models Compliant with EURO 5 Emission Regulations) 6.031,1.531 6.865,1.969 0.833,0.438 10 false Common-rail Assembly 5.51,2.042 7.031,2.26 1.521,0.219 10 false Fuel Pressure Sensor 0.896,0.167 2.063,0.417 1.167,0.25 10 false Detection Portion



b.

Models Compliant with Tier 1.5 Emission Regulations

i.

The fuel pressure sensor, which is mounted on the each injector assembly, outputs a signal that represents the fuel pressure in the injector assembly to the ECM in order to constantly regulate the fuel at an optimal pressure.


ii.

The fuel pressure sensor consists of a semiconductor which utilizes the characteristics of a silicon chip that changes its electrical resistance when pressure is applied to it.

W112592
1.417,1.667 1.583,1.667 1.583,1.667 1.948,1.917 true 2.26,1.719 2.75,1.167 2.75,1.167 2.917,1.167 true 2.219,1.969 2.833,1.5 2.833,1.5 3,1.5 true 6,4 5.833,4 5.833,4 5.719,3.729 true 0.448,1.573 1.396,2.031 0.948,0.458 10 false Fuel Pressure Sensor Portion 3.042,1.052 4.24,1.281 1.198,0.229 10 false Injector Assembly 3.083,1.396 4.26,1.635 1.177,0.24 10 false Detection Portion 3.938,2.198 5.615,2.417 1.677,0.219 10 false - Sensor Characteristic - 4.198,2.604 4.469,2.865 0.271,0.26 10 false (V) 3.896,3.021 4.396,3.49 0.5,0.469 10 false Output Voltage 4.604,3.854 5.594,4.083 0.99,0.229 10 false Fuel Pressure 6.063,3.594 6.594,3.833 0.531,0.24 10 false (MPa) 6.052,3.885 6.729,4.135 0.677,0.25 10 false 220 MPa