Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › ECD SYSTEM › from 2012.04
NM1840EF _51 Engine / Hybrid System _010297 1KD-FTV ENGINE CONTROL _0055222 ECD SYSTEM DE DETAILS F

1KD-FTV ENGINE CONTROL  ECD SYSTEM  DETAILS  GLOW PLUG CONTROL  


OPERATION


a.

On the models compliant with EURO 5 and Tier 1.5 emission regulations, glow plug control carries out the following controls:

i.

When the ignition switch is turned from off to ON, the ECM sends a signal to the glow plug controller. Based on this signal, the glow plug controller heats the glow plug assemblies rapidly. At this moment, the glow indicator light in the combination meter is illuminated to inform the driver that the glow plug assemblies are being heated.


ii.

When the engine starts and the starter signal is off, after-glow control is conducted.


iii.

In accordance with signals from the ECM, the glow plug controller independently applies current via the glow plug assembly in each cylinder to control the temperature of each cylinder independently.


iv.

When the glow plug controller detects a malfunction in the glow circuit, it sends a diagnostic signal to the ECM.


v.

On the models compliant with EURO 5 emission regulations, while the catalyst support control is in operation, the ECM sends a signal to the glow plug controller to heat the glow plug assembly. For details of catalyst support control, see the 1KD-FTV EMISSION CONTROL section.

[EMISSION CONTROL SYSTEM > CATALYST SUPPORT CONTROLEngine / Hybrid System>1KD-FTV EMISSION CONTROL>EMISSION CONTROL SYSTEM>CATALYST SUPPORT CONTROL]

W102695
0.188,2.25 1.552,2.625 1.365,0.375 10 false Glow Plug Assembly 1.948,0.51 2.594,1.177 0.646,0.667 10 false Glow Plug Controller 3.26,0.198 3.75,0.5 0.49,0.302 10 false Battery 3.01,1.938 4.167,2.354 1.156,0.417 10 false Diagnostic Signal 4.615,0.417 4.958,0.771 0.344,0.354 10 false ECM 5.646,0.229 6.594,0.594 0.948,0.365 10 false Ignition Signal 5.646,0.594 6.552,0.958 0.906,0.365 10 false Starter Signal 5.646,0.927 7.052,1.552 1.406,0.625 10 false Engine Coolant Temp. Sensor 5.646,1.573 6.833,2.302 1.188,0.729 10 false Combination Meter Assembly 5.635,2.115 7.104,2.458 1.469,0.344 10 false - Glow Indicator Light 2.969,1.094 4.135,1.823 1.167,0.729 10 false Current Application Request Signal



b.

Except on the models compliant with EURO 5 and Tier 1.5 emission regulations, glow plug control carries out the following controls:

i.

When the ignition switch is turned from off to ON, the ECM operates the glow plug relay to heat the glow plug assemblies rapidly. At that moment, the glow indicator light in the combination meter assembly is illuminated to inform the driver that the glow plug assemblies are being heated.


ii.

When the engine starts and the starter signal is off, after-glow control is conducted. When the temperature of the glow plug assembly reaches a predetermined level during after-glow control, it is maintained at a nearly constant level using the self-temperature-controlling function of the glow plug assembly.

W102694
0.188,2.229 1.552,2.604 1.365,0.375 10 false Glow Plug Assembly 2.958,0.635 3.448,0.938 0.49,0.302 10 false Battery 1.948,1.177 2.635,1.875 0.688,0.698 10 false Glow Plug Relay 5.646,0.24 6.594,0.604 0.948,0.365 10 false Ignition Signal 5.646,0.583 6.552,0.948 0.906,0.365 10 false Starter Signal 5.656,0.948 6.708,1.604 1.052,0.656 10 false Engine Coolant Temp. Sensor 5.635,1.604 6.896,2.302 1.26,0.698 10 false Combination Meter Assembly 5.646,2.292 7.042,2.635 1.396,0.344 10 false - Glow Indicator Light 4.615,0.573 4.958,0.927 0.344,0.354 10 false ECM