CONSTRUCTION
The cylinder head cover is made of plastic to reduce weight and noise.
A baffle plate is provided on the inside of the cylinder head cover to reduce the consumption of engine oil through blow-by gas.
On the models compliant with EURO 5 and Tier 1.5 emission regulations, a No. 2 cylinder head cover is used. A sound-insulating material is pasted inside the No. 2 cylinder head cover to insulate the operating sound of the injector assembly.
On the models compliant with EURO 5 emission regulations, a No. 3 cylinder head cover is used.
| *A | Models Compliant with EURO 5 and Tier 1.5 Emission Regulations | *B | Except Models Compliant with EURO 5 and Tier 1.5 Emission Regulations |
| *C | Models Compliant with EURO 5 Emission Regulations | - | - |
| *1 | No. 3 Cylinder Head Cover | *2 | No. 2 Cylinder Head Cover |
| *3 | Cylinder Head Cover | *4 | Baffle Plate |
| *a | D - D Cross Section | *b | E - E Cross Section |
|
Sound Insulating-material | - | - |