Home › Engine / Hybrid System › 1KD-FTV FUEL › FUEL SYSTEM › from 2012.04
NM1840EF _51 Engine / Hybrid System _010307 1KD-FTV FUEL _0055232 FUEL SYSTEM DE DETAILS F

1KD-FTV FUEL  FUEL SYSTEM  DETAILS  INJECTOR  


CONSTRUCTION


a.

Except on the models compliant with EURO 5 and Tier 1.5 emission regulations, each injector assembly consists of a nozzle needle, a piston, and a solenoid valve.


b.

On the models compliant with EURO 5 emission regulations, each injector assembly consists of a nozzle needle, 2 pistons, a three-way valve and a piezo actuator.


c.

On the models compliant with Tier 1.5 emission regulations, each injector assembly consists of a nozzle needle, 2 pistons, a three-way valve, a piezo actuator, a fuel pressure sensor, a fuel temperature sensor and memory IC. The fuel temperature sensor and memory IC communicate with the ECM.


d.

Except on the models compliant with Tier 1.5 emission regulations, An injector compensation value and a Quick Response (QR) code containing encoded characteristics of the injector are printed on each injector.


e.

On models compliant with Tier 1.5 emission regulations, an injector compensation value and a QR code are not printed on the injector assembly because injection volume is automatically corrected.


f.

On the models compliant with Tier 1.5 emission regulations, the injector assembly is provided with an auto-learning function. Learned values are stored by the injector assembly in its own built-in memory IC.

Models Compliant with EURO 5 Emission Regulations
W107462
1.5,0.615 1.313,0.479 1.313,0.479 1.167,0.479 true 1.656,3.469 1.354,3.469 true 1.625,2.74 1.344,2.74 true 1.625,2.563 1.344,2.563 true 4.99,2.604 4.99,3.083 true 5.625,2.427 6.104,2.427 true 1.625,2.906 1.448,3.052 1.448,3.052 1.354,3.052 true 1.615,2.052 1.438,1.958 1.438,1.958 1.344,1.958 true 0.979,0.375 1.146,0.552 0.167,0.177 10 false *1 1.177,1.854 1.344,2.031 0.167,0.177 10 false *2 1.167,2.448 1.333,2.625 0.167,0.177 10 false *3 1.167,2.635 1.333,2.813 0.167,0.177 10 false *4 1.177,2.958 1.344,3.135 0.167,0.177 10 false *5 4.917,3.115 5.083,3.292 0.167,0.177 10 false *7 6.125,2.323 6.292,2.5 0.167,0.177 10 false *8 1.177,3.375 1.344,3.552 0.167,0.177 10 false *6
*1 Injector Assembly *2 Piezo Actuator
*3 No. 1 Piston *4 No. 2 Piston
*5 Three-way Valve *6 Nozzle Needle
*7 QR Code *8 Injector Compensation Value


Models Compliant with Tier 1.5 Emission Regulations
W107455
3.458,1.323 3.26,1.188 3.26,1.188 3.115,1.188 true 3.563,3.646 3.25,3.646 true 3.542,3.031 3.25,3.031 true 3.542,2.896 3.25,2.896 true 3.542,3.188 3.365,3.333 3.365,3.333 3.271,3.333 true 3.51,2.417 3.333,2.313 3.333,2.313 3.229,2.313 true 3.74,1.51 3.885,1.354 3.885,1.354 3.979,1.354 true 2.938,1.094 3.104,1.271 0.167,0.177 10 false *1 3.063,2.219 3.229,2.396 0.167,0.177 10 false *3 3.99,1.25 4.156,1.427 0.167,0.177 10 false *2 3.073,2.792 3.24,2.969 0.167,0.177 10 false *4 3.073,2.958 3.24,3.135 0.167,0.177 10 false *5 3.083,3.229 3.25,3.406 0.167,0.177 10 false *6 3.094,3.542 3.26,3.719 0.167,0.177 10 false *7
*1 Injector Assembly *2 Fuel Temperature Sensor, Fuel Pressure Sensor and Memory IC Portion
*3 Piezo Actuator *4 No. 1 Piston
*5 No. 2 Piston *6 Three-way Valve
*7 Nozzle Needle - -


Except Model Compliant with EURO 5 and Tier 1.5 Emission Regulations
W102289
1.729,0.375 1.542,0.188 1.542,0.188 1.385,0.188 true 1.854,0.875 1.542,0.719 1.542,0.719 1.396,0.719 true 1.844,1.917 1.365,1.917 true 1.854,3.313 1.375,3.313 true 5.302,2.24 5.302,2.719 true 6.229,2.031 6.708,2.031 true 1.208,0.083 1.375,0.26 0.167,0.177 10 false *1 1.219,0.646 1.385,0.823 0.167,0.177 10 false *2 1.198,1.833 1.365,2.01 0.167,0.177 10 false *3 1.208,3.24 1.375,3.417 0.167,0.177 10 false *4 5.229,2.74 5.396,2.917 0.167,0.177 10 false *5 6.729,1.927 6.896,2.104 0.167,0.177 10 false *6
*1 Injector Assembly *2 Solenoid Valve
*3 Piston *4 Nozzle Needle
*5 QR Code *6 Injector Compensation Value


HINT:
·

Except on the models compliant with Tier 1.5 emission regulations, if the ECM is replaced, use the intelligent tester II and input the injector compensation values of all 4 injectors. If the injector is replaced, input the injector compensation value of the replaced injector. Then, the proper compensation will be made so that the injection volume precision prior to the replacement will remain unchanged. For details, refer to the Repair Manual.

·

The QR code, which requires a special scan tool, is not used at TOYOTA dealers.

·

What is Quick Response (QR) Code?

·

QR code, a matrix symbology consisting of an array of nominally square cells, allows omni-directional, high-speed reading of large amounts of data.

·

QR code encodes many types of date such as numeric, alphanumeric, kanji, kana and binary code. A maximum of 7089 characters (numeric) can be encoded.

·

QR code (2D code) contains information in the vertical and horizontal directions, whereas a bar code contains data in one direction only. QR code (2D code) holds a considerably greater volume of information than a bar code.






OPERATION


a.

Models Compliant with EURO 5 and Tier 1.5 Emission Regulations

i.

When current is applied to the piezo actuator, the No. 1 piston, No. 2 piston and three-way valve are pushed down.


ii.

The orifice on the upper part of the three-way valve opens and the fuel in the control chamber flows out.


iii.

The fuel pressure in the control chamber drops.


iv.

As a result, the nozzle needle is pushed up due to fuel pressure, causing fuel injection.


v.

Current to the piezo actuator is shut off and the No. 1 and No. 2 pistons and the three-way valve are pushed up due to spring tension.


vi.

The orifice on the upper part of the three-way valve closes to stop fuel flow.


vii.

The fuel pressure in the control chamber rises.


viii.

As a result, the nozzle needle goes down to stop fuel injection.

W102699
1.167,0.625 1.365,0.625 1.365,0.625 1.708,0.875 true 1.167,0.292 1.365,0.292 1.365,0.292 1.708,0.531 true 1.188,1.125 1.344,1.125 1.344,1.125 1.75,1.406 true 1.156,1.521 1.313,1.521 1.313,1.521 1.719,1.802 true 1.156,2.542 1.313,2.542 1.313,2.542 1.719,2.271 true 1.844,2.573 1.438,2.854 1.438,2.854 1.146,2.854 true 5.063,2.573 4.656,2.854 4.656,2.854 4.365,2.854 true 1.833,3.083 1.427,3.24 1.427,3.24 1.135,3.24 true 1.177,1.771 1.313,1.771 1.313,1.771 1.792,2.094 true 2.521,2.344 1.802,2.26 true 2.083,0.625 2.542,0.365 true 1.927,2.51 2.521,2.792 true 1.854,2.958 2.531,3.156 true 1.802,1.49 2.521,1.188 true 1.802,1.833 2.521,1.521 true 5.094,2.281 5.813,1.969 true 5.146,2.854 5.833,2.646 true 4.333,1.979 5.052,2.167 true 5.083,1.552 5.802,1.25 true 5.094,1.875 5.813,1.563 true 5.208,2.396 5.823,2.302 5.823,2.302 5.188,2.573 true 1,0.208 1.167,0.385 0.167,0.177 10 false *1 2.563,0.24 2.781,0.417 0.219,0.177 10 false (2) 5.854,1.135 6.073,1.313 0.219,0.177 10 false (5) 4.146,1.875 4.365,2.052 0.219,0.177 10 false (6) 5.854,1.458 6.073,1.635 0.219,0.177 10 false (5) 5.854,1.885 6.073,2.063 0.219,0.177 10 false (5) 5.854,2.542 6.073,2.719 0.219,0.177 10 false (8) 5.854,2.198 6.073,2.375 0.219,0.177 10 false (7) 2.542,2.698 2.76,2.875 0.219,0.177 10 false (3) 2.563,3.083 2.781,3.26 0.219,0.177 10 false (4) 1,0.552 1.167,0.729 0.167,0.177 10 false *2 1.99,0.146 2.156,0.323 0.167,0.177 10 false *a 2.438,0.833 2.604,1.01 0.167,0.177 10 false *b 5.719,0.833 5.885,1.01 0.167,0.177 10 false *b 1,1.063 1.167,1.24 0.167,0.177 10 false *3 1,1.448 1.167,1.625 0.167,0.177 10 false *4 1,1.708 1.167,1.885 0.167,0.177 10 false *5 1,2.448 1.167,2.625 0.167,0.177 10 false *6 1,2.708 1.167,2.885 0.167,0.177 10 false *7 1,3.156 1.167,3.333 0.167,0.177 10 false *8 4.208,2.76 4.375,2.938 0.167,0.177 10 false *7 2.563,1.052 2.781,1.229 0.219,0.177 10 false (1) 2.563,1.375 2.781,1.552 0.219,0.177 10 false (1) 2.563,2.25 2.781,2.427 0.219,0.177 10 false (1)
*1 Injector Assembly *2 Piezo Actuator
*3 No. 1 Piston *4 No. 2 Piston
*5 Orifice *6 Three-way Valve
*7 Control Chamber *8 Nozzle Needle
*a Return Fuel *b Fuel from Common-rail




b.

Except Models Compliant with EURO 5 and Tier 1.5 Emission Regulations

i.

When electrical current is applied to the solenoid coil, it pulls the solenoid valve up.


ii.

The orifice of the control chamber opens, allowing the fuel to flow out.


iii.

The fuel pressure in the control chamber drops.


iv.

Simultaneously, fuel flows from the orifice to the bottom of the piston and raises the piston up (to enhance response).


v.

As a result, the piston raises the nozzle needle to inject fuel.

W102351
2.021,0.458 1.385,0.458 true 2.021,0.667 1.385,0.667 true 2.125,1.427 1.385,1.427 true 2.125,1.99 1.385,1.99 true 1.792,0.25 1.646,0.104 1.646,0.104 1.479,0.104 true 5.229,0.875 6.083,1.052 6.083,1.052 6.219,1.052 true 5.063,1.146 5.917,1.323 5.917,1.323 6.052,1.323 true 5.333,1.74 6.188,1.917 6.188,1.917 6.323,1.917 true 4.885,2.271 4.542,2.448 4.542,2.448 4.417,2.448 true 1.323,0.042 1.521,0.219 0.198,0.177 10 false *1 4.208,0.333 4.417,0.542 0.208,0.208 10 false (1) 6.26,0.969 6.469,1.177 0.208,0.208 10 false (2) 6.073,1.26 6.281,1.469 0.208,0.208 10 false (3) 6.344,1.854 6.552,2.063 0.208,0.208 10 false (4) 4.219,2.365 4.427,2.573 0.208,0.208 10 false (5) 1.188,1.073 1.385,1.25 0.198,0.177 10 false *a 3.146,1.073 3.344,1.25 0.198,0.177 10 false *b 1.208,0.396 1.406,0.573 0.198,0.177 10 false *2 1.208,0.604 1.406,0.781 0.198,0.177 10 false *3 1.208,1.365 1.406,1.542 0.198,0.177 10 false *4 1.208,1.927 1.406,2.104 0.198,0.177 10 false *5
*1 Injector Assembly *2 Solenoid Coil
*3 Solenoid Valve *4 Piston
*5 Nozzle Needle - -
*a Fuel from Common-rail *b Return Fuel