OPERATION
On the models compliant with EURO 5 and Tier 1.5 emission regulations, EGR system carries out the following controls:
The ECM actuates the electric EGR control valve assembly, which regulates volume of EGR gas recirculation, in accordance with the engine conditions.
The ECM switches the bypass passage of the EGR pipe sub-assembly via the VSV (for EGR cooler bypass switching valve) in 2 stages in order to optimize the temperature of the EGR gas and clean exhaust gases.
| *1 | Engine | *2 | Exhaust Manifold |
| *3 | Turbocharger Sub-assembly | *4 | EGR Passage in Cylinder Head |
| *5 | EGR Pipe Sub-assembly | *6 | Bypass Passage |
| *7 | EGR Cooler | *8 | No. 2 EGR Valve Assembly |
| *9 | EGR Cooler Bypass Switching Valve | *10 | Actuator for EGR Cooler Bypass Switching Valve |
| *11 | VSV (for EGR Cooler Bypass Switching Valve) | *12 | Vacuum Pump |
| *13 | EGR Valve | *14 | EGR Valve Position Sensor |
| *15 | DC Motor for EGR Valve Control | *16 | Throttle Position Sensor |
| *17 | Diesel Throttle Valve | *18 | Throttle Control Motor |
| *19 | Oxidation Catalyst | *20 | Diesel Particulate Filter (DPF) |
| *21 | ECM | *22 | Atmospheric Pressure Sensor |
| *23 | Crank Position Sensor | *24 | Accelerator Pedal Position Sensor |
| *25 | Engine Coolant Temperature Sensor | *26 | Turbo Pressure Sensor |
| *27 | Intake Air Temperature Sensor | *28 | Intake Mass Air Flow Meter Sub-assembly |
|
Exhaust Gas |
|
Intake Air |
| *1 | Engine | *2 | EGR Passage in Cylinder Head |
| *3 | Exhaust Manifold | *4 | Oxidation Catalyst |
| *5 | EGR Pipe Sub-assembly | *6 | Bypass Passage |
| *7 | EGR Cooler | *8 | No. 2 EGR Valve Assembly |
| *9 | EGR Cooler Bypass Switching Valve | *10 | Actuator for EGR Cooler Bypass Switching Valve |
| *11 | VSV (for EGR Cooler Bypass Switching Valve) | *12 | Vacuum Pump |
| *13 | EGR Valve | *14 | EGR Valve Position Sensor |
| *15 | DC Motor for EGR Valve Control | *16 | Throttle Position Sensor |
| *17 | Diesel Throttle Valve | *18 | Throttle Control Motor |
| *19 | ECM | *20 | Atmospheric Pressure Sensor |
| *21 | Crank Position Sensor | *22 | Accelerator Pedal Position Sensor |
| *23 | Engine Coolant Temperature Sensor | *24 | Turbo Pressure Sensor |
| *25 | Intake Air Temperature Sensor | *26 | Intake Mass Air Flow Meter Sub-assembly |
|
Exhaust Gas |
|
Intake Air |
On the models compliant with EURO 4, EURO3, EURO 2 and EURO 1 emission regulations, EGR system carries out the following controls:
By sensing the engine driving conditions and actual amount of EGR valve opening*, the ECM electrically operates the E-VRV (for EGR valve control) and VSV (for EGR valve close), which control the magnitude of vacuum introduced into the diaphragm of the electric EGR control valve assembly. In addition, the ECM controls the diesel throttle valve opening position using the throttle control motor. As a result, the amount of recirculating exhaust gas is regulated. EGR valve opening lift is controlled by modulated negative pressure.
*: Models compliant with EURO 4 emission regulations
The VSV (for EGR valve close) is activated when the EGR control is stopped, in order to introduce the atmospheric pressure to the diaphragm of electric EGR control valve assembly and improve EGR valve closure response to maintain driveability.
On the models compliant with EURO 4 emission regulations, the ECM switches the bypass passage of the EGR pipe sub-assembly via the VSV (for EGR cooler bypass switching valve) in 2 stages in order to optimize the temperature of the EGR gas and clean exhaust gases.
| *1 | Engine | *2 | EGR Passage in Cylinder Head |
| *3 | Exhaust Manifold | *4 | Oxidation Catalyst |
| *5 | Electric EGR Control Valve Assembly | *6 | EGR Valve Position Sensor |
| *7 | EGR Valve | *8 | No. 2 EGR Valve Assembly |
| *9 | EGR Cooler Bypass Switching Valve | *10 | Actuator for EGR Cooler Bypass Switching Valve |
| *11 | EGR Pipe Sub-assembly | *12 | Bypass Passage |
| *13 | EGR Cooler | *14 | VSV (for EGR Cooler Bypass Switching Valve) |
| *15 | Vacuum Damper | *16 | VSV (for EGR Valve Close) |
| *17 | Throttle Position Sensor | *18 | Diesel Throttle Valve |
| *19 | Throttle Control Motor | *20 | Vacuum Pump |
| *21 | E-VRV (for EGR Valve Control) | *22 | ECM |
| *23 | Atmospheric Pressure Sensor | *24 | Crank Position Sensor |
| *25 | Accelerator Pedal Position Sensor | *26 | Engine Coolant Temperature Sensor |
| *27 | Turbo Pressure Sensor | *28 | Intake Air Temperature Sensor |
| *29 | Intake Mass Air Flow Meter Sub-assembly | - | - |
|
Exhaust Gas |
|
Intake Air |
| *A | Models Compliant with EURO 3 and EURO 2 Emission Regulations and Models for High Altitude Countries | - | - |
| *1 | Engine | *2 | EGR Passage in Cylinder Head |
| *3 | Exhaust Manifold | *4 | Oxidation Catalyst |
| *5 | Electric EGR Control Valve Assembly | *6 | EGR Valve |
| *7 | EGR Pipe Sub-assembly | *8 | Vacuum Damper |
| *9 | VSV (for EGR Valve Close) | *10 | Throttle Position Sensor |
| *11 | Diesel Throttle Valve | *12 | Throttle Control Motor |
| *13 | Vacuum Pump | *14 | E-VRV (for EGR Valve Control) |
| *15 | ECM | *16 | Atmospheric Pressure Sensor |
| *17 | Crank Position Sensor | *18 | Accelerator Pedal Position Sensor |
| *19 | Engine Coolant Temperature Sensor | *20 | Turbo Pressure Sensor |
| *21 | Intake Air Temperature Sensor | *22 | Intake Mass Air Flow Meter Sub-assembly |
|
Exhaust Gas |
|
Intake Air |