Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › MONITOR SYSTEM › 2012.01–2013.10
NM1840EF _56 Audio / Visual / Telematics _010362 PARK ASSIST / MONITORING _0055294 MONITOR SYSTEM CO CONTROL F

PARK ASSIST / MONITORING  MONITOR SYSTEM  CONTROL  MONITOR CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Radio and Display Receiver Assembly*1 Displays the image transmitted by the rear television camera assembly on the screen.
Display and Navigation Module Display*2
Rear Television Camera Assembly Captures images in rear of the vehicle and outputs visual signals to the audio head unit.
ECM Transmits the vehicle signal to the audio head unit.
Back-up Light Switch Assembly*3 Transmits the on/off signal of the back-up light switch assembly to the ECM.
Park/Neutral Position Switch Assembly*4 Transmits the shift position signal to the ECM.

*1: Models with radio and display receiver assembly

*2: Models with display and navigation module display

*3: Models with manual transmission

*4: Models with automatic transmission



OPERATING CONDITION


a.

The rear view monitor system operates when the following conditions are met:

·

The ignition switch is ON.

·

The back-up light switch is on.*1

·

The shift lever is moved to R.*2

*1: Models with manual transmission

*2: Models with automatic transmission





FUNCTION


a.

Area Displayed on Screen

i.

Rear Television Camera Assembly

·

On the display, objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.

·

The television camera uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.

Y109964

HINT:

The area displayed on the screen may vary in accordance with vehicle status or road conditions. The area covered by the television camera is limited. The television camera does not show objects close to either corner of the bumper or under the bumper.






DIAGNOSIS


a.

The monitor system is equipped with a diagnosis function which can display the diagnosis menus. For details, refer to the Repair Manual.