Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › ECD SYSTEM › from 2012.04
NM1840EF _51 Engine / Hybrid System _010297 1KD-FTV ENGINE CONTROL _0055222 ECD SYSTEM DE DETAILS F

1KD-FTV ENGINE CONTROL  ECD SYSTEM  DETAILS  intelligent-ACCURACY REFINEMENT TECHNOLOGY (i-ART)  


OPERATION


a.

Each injector detects both the fuel pressure under the following conditions and the fuel temperature using its own built-in fuel temperature and fuel pressure sensors. The injector gives these values as feedback to the ECM.

·

When there is no injection

·

When electrical current starts to flow

·

When injection starts

·

When the maximum injection rate has been reached

·

When electrical current flow has stopped

·

When the injection rate has been reduced

·

When injection has stopped



b.

The ECM optimally controls the fuel injection volume based on the feedback values. In addition, fuel injection volume differences between each cylinder are suppressed by directly detecting the injection pressure of each cylinder.


c.

By detecting abnormal levels of fuel pressure under each condition, the ECM also determines the occurrence of abnormalities such as non-injection of the injector assembly, constant injection or fuel leakage.


d.

The injector assembly is provided with an auto-learning function. Learned values are stored by the injector assembly in its own built-in memory IC.

W107479
0.656,5.177 0.792,5.302 0.792,5.302 0.896,5.302 true 0.76,4.781 0.896,4.677 0.896,4.677 1.01,4.677 true 0.635,4.865 0.802,4.99 0.802,4.99 0.948,4.99 true 1.948,0.875 2.125,1.052 0.177,0.177 10 false *1 5.104,0.875 5.281,1.052 0.177,0.177 10 false *2 3.677,2.615 3.854,2.792 0.177,0.177 10 false *3 0.99,4.865 1.167,5.042 0.177,0.177 10 false *5 0.948,5.177 1.125,5.354 0.177,0.177 10 false *6 1.052,4.563 1.229,4.74 0.177,0.177 10 false *4 3.417,0.771 3.594,0.948 0.177,0.177 10 false *a 5.208,1.594 5.385,1.771 0.177,0.177 10 false *b 0.51,4.479 0.688,4.656 0.177,0.177 10 false *h 0.656,1.76 0.833,1.938 0.177,0.177 10 false *f 1.396,4.479 1.573,4.656 0.177,0.177 10 false *i 6.271,1.448 6.448,1.625 0.177,0.177 10 false *g 2.25,4.479 2.427,4.656 0.177,0.177 10 false *j 3.146,4.479 3.323,4.656 0.177,0.177 10 false *k 4.021,4.479 4.198,4.656 0.177,0.177 10 false *l 4.906,4.479 5.177,4.656 0.271,0.177 10 false *m 5.76,4.479 6,4.656 0.24,0.177 10 false *n 2.885,1.448 3.063,1.625 0.177,0.177 10 false *d 1.625,1.75 1.802,1.927 0.177,0.177 10 false *c 2.115,1.75 2.292,1.927 0.177,0.177 10 false *e
*1 ECM *2 Injector Driver
*3 Injector Assembly
·

Fuel Pressure Sensor

·

Fuel Temperature Sensor

·

Memory IC


*4 Fuel Pressure Sensor
*5 Control Chamber *6 Nozzle Needle
*a Fuel Injection Request *b Operating Signal
*c Fuel Pressure Signal *d Each Injector Assembly
*e INJ Communication (Fuel Temperature Signal and Memory IC Communication) *f Feedback
*g Command Signal *h When there is no injection
*i When electrical current starts to flow *j When injection starts
*k When the maximum injection rate has been reached *l When electrical current flow has stopped
*m When the injection rate has been reduced *n When injection has stopped
V100135

Nozzle Needle Movement - -