CONSTRUCTION
Impact Absorbing Structure for Frontal Collision
A structure that ensures collision energy absorption efficiency, dissipates impact, and minimizes cabin deformation during a frontal collision has been achieved.
An engine under brace sub-assembly is used in the lower front portion of the frame. In the event of a frontal collision, the impact energy is transmitted to the frame crossmember sub-assembly No. 1 through the engine under brace sub-assembly. Thus, the moment of the backward rotation at the frame crossmember sub-assembly No. 1 occurs in combination with the moment of the forward rotation at the suspension arm support sub-assembly. This helps minimize the floor deformation caused by the collapse of the suspension arm support sub-assembly.
| *1 | Suspension Arm Support Sub-assembly | *2 | Engine Under Brace Sub-assembly |
| *3 | Frame Crossmember Sub-assembly No. 1 | *4 | Front Floor Pan |
| *a | Axial Compression Area | *b | Moderate Bend Area |
|
Front Impact Energy | - | - |
The optimally allocated panels and reinforcements allow the front impact energy received from the front end and frame sub-assembly to be dissipated and absorbed by the front body pillar, rocker, and floor reinforcement, in order to minimize the deformation of the cabin.
| *1 | Front Body Pillar | *2 | Frame Sub-assembly |
| *3 | Rocker | - | - |
|
Front Impact Energy | - | - |
Impact Absorbing Structure for Side Collision
A head impact protection structure is used. With this type of construction, if the occupant's head hits against the roof side rail and pillar in reaction to a collision, the inner ribs of the roof side rail and pillar collapse to help reduce the impact.
| *A | Double Cab Models | *B | Single Cab Models |
| *C | Extra Cab Models | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | C - C Cross Section | *D | D - D Cross Section |
|
Head Impact Protection Structure |
|
Energy Absorbing Rib |