Home › Drivetrain › A750F AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LOCK SYSTEM › from 2012.04
NM1840EF _52 Drivetrain _010339 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0073743 SHIFT LOCK SYSTEM CO CONTROL F

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LOCK SYSTEM  CONTROL  SHIFT LOCK CONTROL  


SYSTEM CONTROL


a.

The shift lock control ECU sub-assembly has a built-in P detection switch to detect the shift lever position, and receives input signals from the stop light switch assembly and ignition switch. Upon receiving these signals, the shift lock control ECU sub-assembly turns on the shift lock solenoid and the key interlock solenoid in order to release the shift lock and key interlock.



FUNCTION


a.

The shift lock system prevents the shift lever from being moved to any position other than P, unless the ignition switch is ON and the brake pedal is depressed. This prevents the vehicle from starting off suddenly.


b.

A shift lock release button, which manually overrides the shift lock mechanism, is used.


c.

The key interlock function prevents the key from being pulled out after the ignition switch has been turned off, unless the shift lever has been moved to P. Thus, the driver is urged to park the vehicle with the shift lever in P.