Home › Engine / Hybrid System › 1KD-FTV ENGINE MECHANICAL › ENGINE UNIT › 2013.10–2014.10
NM1840EF _51 Engine / Hybrid System _010303 1KD-FTV ENGINE MECHANICAL _0055228 ENGINE UNIT GE GENERAL F

1KD-FTV ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 1KD-FTV TOYOTA Direct injection 4 stroke common-rail Diesel engine (D-4D) is an in-line 4-cylinder, 3.0-liter, 16-valve DOHC, turbocharged diesel engine with intercooler. This engine uses the direct injection system and common-rail system to achieve high performance, clean emissions, low noise and low vibrations.


b.

1KD-FTV engine is used on models for Brazil, in which intelligent-Accuracy Refinement Technology (i-ART) is used, thus improving injection volume accuracy and providing a self-diagnosis function for the injector assembly.


c.

An intercooler is provided. This lowers the intake air temperature and improves power output.



SPECIFICATION


No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Belt and Gear Drive
Combustion Chamber Direct Injection Type
Manifolds Cross-flow
Fuel System Common-rail Type
Displacement 2982 cm3 (182.0 cu. in.)
Bore x Stroke 96.0 mm x 103.0 mm (3.78 in. x 4.06 in.)
Compression Ratio EURO 5 and Tier 1.5 15 : 1
Except EURO 5 and Tier 1.5 17.9 : 1
Max. Output (EEC) EURO 5 and EURO 4 126 kW @ 3600 rpm
Except EURO 4 and EURO 5 120 kW @ 3400 rpm
Max. Torque (EEC) EURO 5 and EURO 4 343 N*m @ 1400 to 3400 rpm
Except EURO 5 and EURO 4 343 N*m @ 1400 to 3200 rpm
Valve Timing EURO 5 and Tier 1.5 Intake Open 3° BTDC
Closed 28° ABDC
Exhaust Open 48° BBDC
Closed 0° ATDC
Except EURO 5 and Tier 1.5 Intake Open 2° BTDC
Closed 37° ABDC
Exhaust Open 45° BBDC
Closed 0° ATDC
Firing Order 1 - 3 - 4 - 2
Fuel Cetane Number 48 or higher
Emission Regulation EURO 5*1
EURO 4*2
EURO 3*3
EURO 2*4
EURO 1*5
Tier 1.5*6
-*7
Engine Service Mass*8 EURO 5 271 kg (597 lb)
Except EURO 5 M/T 261 kg (575 lb)
A/T 251 kg (553 lb)

*1: Models for Chile (EURO 5)

*2: TASA made models (except models for Brazil, Peru, Colombia, high altitude countries and export package) and TMT made models for Chile (EURO 4)

*3: Models for Peru and TMT made models (except models for Chile, Colombia, ASEAN, high altitude countries and export package)

*4: Models for Colombia and ASEAN

*5: TSAM made models with automatic transmission and models for high altitude countries and export package

*6: Models for Brazil

*7: TSAM made models with manual transmission

*8: Weight shows the figure with oil and water fully filled.


W112606
0.229,0.156 5.427,0.458 5.198,0.302 12 false Models Compliant with EURO 5 and EURO 4 Emission Regulations: 0.188,4.479 5.99,4.75 5.802,0.271 12 false Except Models Compliant with EURO 5 and EURO 4 Emission Regulations: 1.5,1.844 1.979,2.25 0.479,0.406 10 false Torque (N*m) 5.521,1.688 6,2.083 0.479,0.396 10 false Output (kW) 3,4.104 4.385,4.333 1.385,0.229 10 false Engine Speed (rpm) 2.49,3.667 2.865,3.896 0.375,0.229 10 false 1000 2.979,3.667 3.375,3.875 0.396,0.208 10 false 2000 3.458,3.667 3.823,3.948 0.365,0.281 10 false 3000 4.427,3.667 4.813,3.917 0.385,0.25 10 false 5000 3.938,3.667 4.354,3.938 0.417,0.271 10 false 4000 4.76,3.417 4.917,3.615 0.156,0.198 10 false 0 4.75,3.208 4.927,3.417 0.177,0.208 10 false 10 4.74,2.99 4.917,3.198 0.177,0.208 10 false 20 4.74,2.594 4.917,2.802 0.177,0.208 10 false 40 4.75,2.802 4.927,3.01 0.177,0.208 10 false 30 4.75,2.385 4.927,2.594 0.177,0.208 10 false 50 4.74,2.167 4.917,2.375 0.177,0.208 10 false 60 4.75,6.281 4.927,6.49 0.177,0.208 10 false 70 4.75,1.75 4.927,1.958 0.177,0.208 10 false 80 4.75,1.542 4.927,1.792 0.177,0.25 10 false 90 4.75,1.333 5.052,1.51 0.302,0.177 10 false 100 2.25,2.344 2.604,2.563 0.354,0.219 10 false 240 2.25,2.083 2.583,2.292 0.333,0.208 10 false 280 2.25,1.844 2.646,2.042 0.396,0.198 10 false 320 2.25,1.604 2.563,1.792 0.313,0.188 10 false 360 2.271,1.354 2.667,1.563 0.396,0.208 10 false 400 2.25,2.594 2.563,2.792 0.313,0.198 10 false 200 4.75,0.719 5.042,0.917 0.292,0.198 10 false 130 4.75,0.917 5.073,1.135 0.323,0.219 10 false 120 4.75,1.135 5.073,1.354 0.323,0.219 10 false 110 4.75,7.75 4.906,7.948 0.156,0.198 10 false 0 4.75,7.531 4.927,7.74 0.177,0.208 10 false 10 4.75,7.333 4.927,7.542 0.177,0.208 10 false 20 4.75,7.125 4.927,7.333 0.177,0.208 10 false 30 4.75,6.906 4.927,7.115 0.177,0.208 10 false 40 4.75,6.688 4.927,6.896 0.177,0.208 10 false 50 4.75,6.479 4.927,6.688 0.177,0.208 10 false 60 4.75,1.969 4.927,2.177 0.177,0.208 10 false 70 4.75,6.073 4.927,6.281 0.177,0.208 10 false 80 4.75,5.865 4.927,6.073 0.177,0.208 10 false 90 4.75,5.635 5.052,5.813 0.302,0.177 10 false 100 4.75,5.427 5.073,5.646 0.323,0.219 10 false 110 4.75,5.219 5.073,5.438 0.323,0.219 10 false 120 4.75,5.01 5.042,5.208 0.292,0.198 10 false 130 2.271,6.719 2.583,6.917 0.313,0.198 10 false 200 2.25,6.51 2.604,6.729 0.354,0.219 10 false 240 2.25,6.292 2.583,6.5 0.333,0.208 10 false 280 2.25,6.083 2.646,6.281 0.396,0.198 10 false 320 2.25,5.854 2.563,6.042 0.313,0.188 10 false 360 2.479,8.021 2.854,8.25 0.375,0.229 10 false 1000 2.958,8 3.375,8.188 0.417,0.188 10 false 2000 3.448,8 3.813,8.281 0.365,0.281 10 false 3000 3.927,8 4.344,8.271 0.417,0.271 10 false 4000 4.406,8 4.792,8.25 0.385,0.25 10 false 5000 3.031,8.354 4.417,8.583 1.385,0.229 10 false Engine Speed (rpm) 1.333,6.427 1.813,6.833 0.479,0.406 10 false Torque (N*m) 5.604,6.104 6.083,6.5 0.479,0.396 10 false Output (kW) 2.26,6.927 2.573,7.125 0.313,0.198 10 false 160


MAIN FEATURES


a.

This engine has been able to achieve the following performance through the use of the items listed below:

i.

High performance and fuel economy


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emissions

Item (1) (2) (3) (4) (5)
Engine Proper A cylinder head cover made of plastic is used. - - ○ - -
A cylinder head made of aluminum alloy is used. - - ○ - -
A piston provided with combustion chamber is used. ○ ○ - - ○
A passage for the EGR is provided in the cylinder head. - - - - ○
2 balance shafts are used. - ○ - - -
Valve Mechanism An intake camshaft is driven by a timing belt, and an exhaust camshaft is driven by a gear. - ○ ○ - -
An automatic tensioner is provided for the timing belt. - - - ○ -
Cooling System Toyota Genuine Super Long Life Coolant (SLLC) is used. - - - ○ -
Intake and Exhaust System A diesel throttle valve is used. ○ ○ - - ○
A swirl control valve is used. ○ ○ - - ○
A variable nozzle vane type turbocharger is used. ○ - - - ○
An intercooler is used. ○ - - - ○
Fuel System An HP3 type supply pump is used. ○ ○ ○ - -
A common-rail type fuel injection system is used. ○ ○ - - ○
An injector is provided in the bore center. ○ ○ - - ○
Compensation values and Quick Response (QR) codes are used.*1 ○ ○ - - ○
A fuel cooler is used. ○ - - - -
Serpentine Belt Drive System A serpentine belt drive system is used. - - - ○ -
Engine Control System An intake mass air flow meter is used. ○ - - - ○
Non-contact sensors are used as the accelerator pedal position sensor and diesel throttle valve position sensor. ○ - - - ○
A pilot injection control system is used. - ○ - - ○
A swirl control is used. ○ - - - -
Emission Control System An EGR system is used.*2 - - - - ○
An EGR cooler with bypass is used.*3 - - - - ○
An oxidation catalyst is used.*4 - - - - ○
An oxidation catalyst and a diesel Particulate Filter (DPF) is used.*5 - - - - ○
A catalyst support control is used.*5 - - - - ○

*1: Except models compliant with Tier 1.5 emission regulations

*2: Models compliant with EURO 5, EURO 4, EURO 3, EURO 2, EURO 1 and Tier 1.5 emission regulations

*3: Models compliant with EURO 5, EURO 4 and Tier 1.5 emission regulations

*4: Models compliant with EURO 4, EURO 3, EURO 2 and Tier 1.5 emission regulations

*5: Models compliant with EURO 5 emission regulations