Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM › from 2013.10
NM1840EF _56 Audio / Visual / Telematics _010361 NAVIGATION / MULTI INFO DISPLAY _0055293 NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM CO CONTROL F

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM  CONTROL  NAVIGATION / MULTI INFORMATION  


FUNCTION OF MAIN COMPONENTS


Component Function
Display and Navigation Module Display Receives and processes the data that is input from various components, displays various pieces of information and operating conditions on the screen, and provides voice guidance.
Navigation Antenna Assembly Receives signals from GPS satellites and transmits them to the navigation receiver assembly.
Combination Meter Assembly Transmits vehicle speed signals to the navigation receiver assembly.
Steering Pad Switch Assembly Enables the driver to operate the navigation system from the steering pad switches.
Telephone Microphone Assembly Transmits voice signals to the display and navigation module assembly.
Back-up Light Switch Assembly*1 Transmits the on/off signals from the back-up light switch assembly to the navigation receiver assembly.
Park/Neutral Position Switch Assembly*2 Transmits the R position signals to the display and navigation module display.
Rear Television Camera Assembly*3 Captures the view behind the vehicle and transmits the image to the display and navigation module display.
No. 1 Stereo Jack Adapter Assembly Transmits information about the portable audio/video player connected to the USB port or AUX port to the display and navigation module display.

*1: Models with manual transmission

*2: Models with automatic transmission

*3: Models with monitor system



FUNCTION


a.

Navigation Screen

i.

The navigation computer calculates the present position and direction of travel, then determines a route and calculates the driving distance based on the following information sources:

·

Map data in the micro SD card

·

Global Positioning System (GPS) satellites

·

Built-in gyro sensor

·

Vehicle speed signal

·

Reverse signal

·

Parking brake signal


Item Function
Map Display Current Position Displays the current position when the navigation system starts.
Moving (Scrolling) Map Moves the map to the user's desired location.
Switching Map Orientation Switches the screen between 2D and 3D views.
Street View Displays different modes on a screen that is split into 2 views.
One-way Street Display Displays the one-way street mark.
Changing Map Scale Changes the map scale between 10 m and 2000 km.
Text Zoom Zooms in on the text of location names and POIs displayed on the map screen.
Registering Scale Scales for each map in accordance with the display method. The registered scale is displayed on the map screen when the MAP button is pressed.
Setting Logo Display Displays logos of various POIs on the map.
Destination Search By Map Destinations can be found on the map.
By Address Searches for the destination by using the destination address entered.
By Home Searches for a route to the user's home.
By Favorites Selects the destination from the locations to search for the destination.
By History Selects the destination from the locations searched in the past to search for the destination.
By Name Searches for the destination by using the destination name entered.
By Near Here Specifies the category of POIs around the current location to search for the destination.
By Near Destination Specifies the category of POIs around the destination to search for the destination.
By Near City Specifies the city, and then the category of POIs around the city to search for the destination.
By Coordinates Specifies the longitude and latitude to search for the destination.
By Special Favorites If the user has special favorites already registered, the destination can be found by specifying one of the favorites.
By Telephone Number The user can find the destination by telephone number.
By Postcode If postal codes are used in your country, you can search for your destination by first entering its post code.
Route Guidance Multiple Destination Setting Sets multiple destinations:
·

Adding waypoint: A waypoint can be added to the route and used during route guidance.

·

Adding destination: A new destination can be added before or after the currently set destination(s).

·

Reordering destination: The arrival order of the multiple destinations that are set can be changed.

·

Deleting destination: A destination can be deleted.


Road Preference The user can choose whether the system uses the following items on the way to the destination:
·

Route display

·

Route search condition/criteria display

·

Distance

·

Travel time


Approaching Intersection Displays the guidance screen of the intersection.
Approaching Motorway Exit or Junction Displays the guidance screen of the motorway exit or junction.
Approaching a Roundabout When the user approaches a roundabout on the route, the roundabout guidance appears on the right pane.
Voice Guidance During route guidance, the following types of voice guidance are provided:
·

Continue driving straight guidance

·

Right/left turn guidance

·

U-turn guidance

·

Road branching guidance

·

Destination approach/arrival guidance and so on


Editing Route The user can edit a route by confirming the set route, specifying waypoints, etc.



b.

Information Screen

i.

The functions of the information screen display are listed below:

Function Outline
Maintenance Information Item setting: Replacement notifications can be given for the following consumable items based on the distance traveled and the duration of usage:
·

Engine oil: Replace engine oil

·

Oil filter: Replace engine oil filter

·

Rotation: Rotate tires

·

Tires: Replace tires

·

Brake pad: Replace brake linings

·

V-belt: Replace V-ribbed belt

·

Coolant: Replace engine coolant

·

Brake oil: Replace brake fluid

·

Trans. Fluid: Replace ATF

·

Air filter: Replace air filter

·

Optional entry: New information items can be created separately from provided ones.


Customization: The setting to automatically notify the replacement time is already set and all the settings can be deleted or updated.




DIAGNOSIS


a.

For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.