CONSTRUCTION
A fuel filter assembly consists of a separate filter element and a filter housing.
A paper filter element that offers high filtering efficiency and captures the minutest particles is used.
A fuel filter warning switch is provided in the fuel filter assembly.
On the models compliant with EURO 4 emission regulations (except models for Colombia), in order to improve the fuel heating performance, a recirculation type fuel heater is used.
| *A | Models Compliant with EURO 4 Emission Regulations (Except Models for Chili) | - | - |
| *1 | Priming Pump | *2 | Fuel Filter Warning Switch (Vacuum Switch) |
| *3 | Filter Element | *4 | Filter Housing |
| *5 | Fuel Heater | *6 | Fuel Sedimenter Level Warning Switch |
OPERATION
Fuel Filter Warning Switch
When the water in the sedimenter section reaches a certain amount, the fuel sedimenter level warning switch comes on, the warning light in the combination meter assembly illuminates, and the multi buzzer sounds.
A fuel filter warning switch, which turns on or off when the internal vacuum of the filter increases, is provided in the fuel filter. This switch, which turns off when the internal vacuum of the fuel filter increases to a predetermined level, is connected by wire to the meter ECU.
When the meter ECU detects that the internal vacuum of the fuel filter has increased (by way of the fuel filter warning switch off signal), it determines that the fuel filter has become clogged. Then, it illuminates the fuel system warning light on the combination meter assembly to urge the driver to replace the fuel filter.
Fuel Heater (Models Compliant with EURO 4 Emission Regulations (Except Models for Colombia))
This heater heats the fuel by recirculating the returned fuel, which is made to have a high temperature by the fuel pumping of the supply pump, to the fuel filter.
While the engine is cold, the recirculation valve inside the fuel heater will open due to the bimetal action, so the return fuel will return to the fuel filter and the fuel tank.
While the engine is warm, the recirculation valve will close due to the bimetal action, so all the return fuel will return to the fuel tank.
| *1 | Fuel Heater | *2 | Recirculation Valve (Bimetal) |
| *a | Cold Engine
(Recirculation Valve: Open) |
*b | Warm Engine
(Recirculation Valve: Closed) |
| *c | To Fuel Filter | *d | To Fuel Tank |
| *e | From Supply Pump Assembly | - | - |