| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| No. 1 nozzle holder clamp x Cylinder head | 22 | 224 | 16 | ||||
| Nozzle leakage pipe assembly x Cylinder head and Injector assembly | for injector hollow screw | 16 | 163 | 12 | |||
| for union bolt | 13 | 133 | 10 | ||||
| Cylinder head cover sub-assembly x Cylinder head | 9.0 | 92 | 80 | ||||
| Wire harness clamp | 13 | 133 | 10 | ||||
| w/ EGR Cooler | No. 4 injection pipe clamp x Intake manifold | 5.0 | 51 | 44 | |||
| w/o EGR Cooler | No. 4 injection pipe clamp x Intake manifold | 13 | 133 | 10 | |||
| No. 4 injection pipe sub-assembly x Injector assembly and Common rail assembly | 35 | 357 | 26 | ||||
| No. 2 injection pipe clamp and No. 3 injection pipe clamp | 5.0 | 51 | 44 | ||||
| No. 1, No. 2 and No. 3 injection pipe sub-assembly x Injector assembly and Common rail assembly | 35 | 357 | 26 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| No. 1 nozzle holder clamp x Cylinder head | 22 | 224 | 16 | ||||
| Nozzle leakage pipe assembly x Cylinder head and Injector assembly | for injector hollow screw | 16 | 163 | 12 | |||
| for union bolt | 13 | 133 | 10 | ||||
| Cylinder head cover sub-assembly x Cylinder head | 9.0 | 92 | 80 | ||||
| No. 2 cylinder head cover sub-assembly x Cylinder head cover sub-assembly | 8.0 | 82 | 71 | ||||
| for i-ART | Wiring harness clamp bracket x No. 2 cylinder head cover sub-assembly | 8.0 | 82 | 71 | |||
| for DPF
No. 2 nozzle leakage pipe assembly x Intake manifold |
for bolt A | 21 | 214 | 15 | |||
| for bolt B | 13 | 133 | 10 | ||||
| for DPF
No. 2 nozzle leakage pipe assembly x Cylinder head |
for union bolt | 21 | 214 | 15 | |||
| for i-ART
No. 2 nozzle leakage pipe assembly x Intake manifold |
for bolt C | 21 | 214 | 15 | |||
| for bolt D | 13 | 133 | 10 | ||||
| for i-ART
No. 2 nozzle leakage pipe assembly x Cylinder head |
for union bolt | 21 | 214 | 15 | |||
| No. 3 nozzle leakage pipe x Intake manifold | for bolt | 13 | 133 | 10 | |||
| No. 3 nozzle leakage pipe x No. 2 nozzle leakage pipe assembly | for fuel check valve | 32 | 326 | 24 | |||
| for DPF | No. 1 vacuum switching valve assembly x No. 2 fuel pipe | 3.5 | 36 | 31 | |||
| for DPF
No. 2 fuel pipe x Fuel supply pump assembly |
for supply pump hollow screw | 21 | 214 | 15 | |||
| for DPF
No. 2 fuel pipe x Intake manifold |
for bolt | 20 | 204 | 15 | |||
| for DPF
No. 2 fuel pipe x No. 2 nozzle leakage pipe assembly |
for fuel check valve | 32 | 326 | 24 | |||
| for DPF
No. 1 fuel pipe x No. 2 fuel pipe |
for union bolt | 21 | 214 | 15 | |||
| for i-ART
No. 2 fuel pipe x Fuel supply pump assembly |
for supply pump hollow screw | 21 | 214 | 15 | |||
| for i-ART
No. 2 fuel pipe x No. 2 nozzle leakage pipe assembly |
for fuel check valve | 32 | 326 | 24 | |||
| Wiring harness clamp bracket x Intake manifold | 13 | 133 | 10 | ||||
| No. 2 injection pipe clamp x Intake manifold | 5.0 | 51 | 44 | ||||
| No. 4 injection pipe sub-assembly x Injector assembly and Common rail assembly | 35 | 357 | 26 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Fuel supply pump assembly x Timing gear case | 21 | 214 | 15 | |||
| Fuel supply pump assembly x Injection gear | 64 | 653 | 47 | |||
| No. 2 camshaft timing pulley flange x Pump drive shaft pulley | 31 | 316 | 23 | |||
| Fuel inlet pipe sub-assembly x Common rail assembly and Fuel supply pump assembly | 35 | 357 | 26 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Fuel supply pump assembly x Timing gear case | 21 | 214 | 15 | |||
| Fuel supply pump assembly x Injection gear | 64 | 653 | 47 | |||
| No. 2 camshaft timing pulley flange x Pump drive shaft pulley | 31 | 316 | 23 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Common rail assembly x Cylinder head | 38 | 387 | 28 | |||
| No. 2 nozzle leakage pipe assembly x Intake manifold and Cylinder head | for bolt | 13 | 133 | 10 | ||
| for union bolt | 21 | 214 | 15 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Common rail assembly x Cylinder head | 38 | 387 | 28 | |||
| for i-ART | Vacuum control valve set x Intake manifold | 20 | 204 | 15 | ||
| Part Tightened | N*m | kgf*cm | in.*lbf | |||
|---|---|---|---|---|---|---|
| Fuel filter assembly x Fuel filter support | 8.5 | 87 | 75 | |||
| Part Tightened | N*m | kgf*cm | in.*lbf | |||
|---|---|---|---|---|---|---|
| Fuel cooler x Body | 7.5 | 76 | 66 | |||
| Part Tightened | N*m | kgf*cm | in.*lbf | |||
|---|---|---|---|---|---|---|
| Injector driver bracket x Injector driver | 2.0 | 20 | 18 | |||
| Injector driver bracket x Body | 8.0 | 82 | 71 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Fuel tank band x Body | 61 | 622 | 45 | |||
| No. 1 fuel tank protector x Fuel tank band | 20 | 204 | 15 | |||