Home › General › SPECIFICATIONS › 1KD-FTV COOLING
RM1840EF _V1 General _009566 SPECIFICATIONS _0051974 1KD-FTV COOLING F

SPECIFICATIONS  1KD-FTV COOLING  TORQUE SPECIFICATIONS  


COOLANT
Part Tightened N*m kgf*cm in.*lbf
Cylinder block drain cock plug x Oil cooler cover sub-assembly 8.0 82 71
Vent plug x Radiator tank upper 2.0 20 18

WATER PUMP
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Water pump assembly x Cylinder block 13 133 10
Fan shroud x Radiator tank upper 5.0 51 44
Fluid coupling fan x Water pump assembly 23 235 17
Radiator reservoir x Radiator tank upper 5.0 51 44
Oil reservoir x Radiator tank upper 4.5 46 40

THERMOSTAT
Part Tightened N*m kgf*cm ft.*lbf
Wire harness clamp bracket x Water inlet 13 133 10
Water inlet x Cylinder block 13 133 10
No. 1 automatic transmission oil cooler tube clamp x Water inlet for Automatic Transmission 12 122 9

RADIATOR
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Radiator assembly x Radiator support 12 122 9
Radiator bracket x Radiator tank upper and lower 13 133 10
Oil cooler x Nut for Automatic Transmission 8.3 85 73
Oil cooler x Cooler pipe for Automatic Transmission 15 153 11