Home › General › SPECIFICATIONS › 2TR-FE INTAKE / EXHAUST › 2012.04–2013.10
RM1840EF _V1 General _009566 SPECIFICATIONS _0051977 2TR-FE INTAKE / EXHAUST F

SPECIFICATIONS  2TR-FE INTAKE / EXHAUST  TORQUE SPECIFICATIONS  


INTAKE MANIFOLD
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Intake manifold stud bolt 3.0 31 27
Wire harness clamp bracket x Intake manifold 8.0 82 71
Intake manifold x Cylinder head 25 255 18
Oil filter tube bracket x Intake manifold
(for Automatic Transmission)
12 122 9

EXHAUST MANIFOLD
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Exhaust manifold x Cylinder head 36 367 27
Exhaust manifold stay x Exhaust manifold, Manual transmission for Bolt A 72 734 53
for Bolt B 44 449 32
for Bolt C 30 306 22
Exhaust manifold stay x Exhaust manifold, Automatic transmission for Bolt A 71 724 52
for Bolt B 44 449 32
for Bolt C 30 306 22
No. 1 exhaust manifold heat insulator x Exhaust manifold
(w/o Secondary Air Injection System)
12 122 9
Front exhaust pipe x Exhaust manifold 43 438 32
Front exhaust pipe x Center exhaust pipe 48 489 35
Air cleaner assembly x Body
(w/o Secondary Air Injection System)
14 143 10
Air cleaner assembly x Intake air connector
(w/o Secondary Air Injection System)
4.0 41 35

EXHAUST PIPE
Part Tightened N*m kgf*cm ft.*lbf
Tailpipe x Center exhaust pipe 48 489 35