Home › General › SPECIFICATIONS › 2TR-FE FUEL
RM1840EF _V1 General _009566 SPECIFICATIONS _0051989 2TR-FE FUEL F

SPECIFICATIONS  2TR-FE FUEL  SERVICE DATA  


FUEL SYSTEM
Standard fuel pressure at idle 281 to 287 kPa (2.87 to 2.93 kgf/cm2, 41 to 42 psi)
Remains as specified for 5 minutes after engine stopped 147 kPa (1.5 kgf/cm2, 21 psi) or higher

FUEL INJECTOR
Fuel injector Resistance Standard 11.6 to 12.4 Ω at 20°C (68°F)
Injection volume Standard 76 to 91 cc (4.6 to 5.6 cu. in.) per 15 seconds
Difference between each injector 15 cc (0.9 cu. in.) or less
Fuel leakage 1 drop or less every 12 minutes

FUEL PUMP
Fuel pump Resistance Standard 0.2 to 3.0 Ω at 20°C (68°F)

FUEL SENDER GAUGE
Fuel sender gauge Resistance Float position is F (upper) Standard 3.0 to 5.0 Ω
Float position is E (lower) Standard 109 to 111 Ω