Home › General › SPECIFICATIONS › POWER ASSIST SYSTEMS › 2011.10–2012.04
RM1840EF _V1 General _009566 SPECIFICATIONS _0052004 POWER ASSIST SYSTEMS F

SPECIFICATIONS  POWER ASSIST SYSTEMS  SERVICE DATA  


Power Steering Fluid
for TMT made "TEXAMATIC 1888" or equivalent
for TASA made ATF "DEXRON 3" or equivalent

Power Steering Fluid
Fluid level rise (Maximum) 5 mm (0.197 in.)
Fluid pressure at idle speed with valve closed 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2 1276 to 1348 psi)
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2, 1276 to 1348 psi)

Vane Pump
Vane pump shaft and vane pump housing oil clearance (Maximum) 0.07 mm (0.00276 in.)
Clearance between the vane pump rotor groove and vane pump plate (Maximum) 0.03 mm (0.00118 in.)
Compression spring free length (Minimum) 29.2 mm (1.15 in.)
Vane pump rotating torque 0.27 N*m (3 kgf*cm, 2 in.*lbf) or less