Home › General › SPECIFICATIONS › POWER ASSIST SYSTEMS › 2012.04–2012.10
RM1840EF _V1 General _009566 SPECIFICATIONS _0052004 POWER ASSIST SYSTEMS F

SPECIFICATIONS  POWER ASSIST SYSTEMS  SERVICE DATA  


Power Steering Fluid
for TMT made "TEXAMATIC 1888" or equivalent
for TASA, TDV made ATF "DEXRON 3" or equivalent
for TSAM made "TEXAMATIC 1322S" or equivalent

Power Steering Fluid
Fluid level rise (Maximum) 5 mm (0.197 in.)
Fluid pressure at idle speed with valve closed (except 1GR-FE) 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2 1276 to 1348 psi)
Fluid pressure at idle speed with valve closed (for 1GR-FE) 8300 to 8800 kPa (84.7 to 89.7 kgf/cm2 1204 to 1276 psi)
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position (except 1GR-FE) 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2, 1276 to 1348 psi)
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position (for 1GR-FE) 8300 to 8800 kPa (84.7 to 89.7 kgf/cm2 1204 to 1276 psi)

Vane Pump
Vane pump shaft and vane pump housing oil clearance (Maximum) 0.07 mm (0.00276 in.)
Clearance between the vane pump rotor groove and vane pump plate (Maximum) 0.03 mm (0.00118 in.)
Compression spring free length (Minimum) 29.2 mm (1.15 in.)
Vane pump rotating torque 0.27 N*m (3 kgf*cm, 2 in.*lbf) or less