Home › General › SPECIFICATIONS › 1GR-FE INTAKE / EXHAUST › from 2012.04
RM1840EF _V1 General _009566 SPECIFICATIONS _0052042 1GR-FE INTAKE / EXHAUST F

SPECIFICATIONS  1GR-FE INTAKE / EXHAUST  TORQUE SPECIFICATIONS  


INTAKE MANIFOLD
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Stud bolt x Intake manifold 8.0 82 71
Intake manifold x Cylinder head 26 265 19
Intake air surge tank x Intake manifold 28 286 21
Water hose sub-assembly x Intake air surge tank 5.4 55 48
No. 2 surge tank stay x Intake air surge tank 21 214 15
No. 1 surge tank stay x Intake air surge tank 21 214 15
Oil baffle plate x No. 1 surge tank stay 9.0 92 80
Throttle body bracket x Throttle body and Intake air surge tank 21 214 15
No. 1 engine room under cover x Body 28 286 21

EXHAUST MANIFOLD
Part Tightened N*m kgf*cm ft.*lbf
Exhaust manifold LH x Cylinder head LH 21 214 15
No. 2 manifold stay x Transmission housing and Exhaust manifold LH 40 408 30
Exhaust manifold RH x Cylinder head RH 21 214 15
Manifold stay x Transmission housing and Exhaust manifold RH 40 408 30
Front exhaust pipe x Exhaust manifold RH 54 551 40
Front exhaust pipe x Center exhaust pipe 43 438 32

EXHAUST PIPE
Part Tightened N*m kgf*cm ft.*lbf
Front exhaust pipe x Exhaust manifold RH 54 551 40
Front No. 2 exhaust pipe x Exhaust manifold LH 54 551 40
Front exhaust pipe x Front No. 2 exhaust pipe 48 489 35
Front exhaust pipe x Center exhaust pipe 43 438 32
Tailpipe x Center exhaust pipe 48 489 35