Home › General › SPECIFICATIONS › 1GR-FE LUBRICATION › from 2012.04
RM1840EF _V1 General _009566 SPECIFICATIONS _0052044 1GR-FE LUBRICATION F

SPECIFICATIONS  1GR-FE LUBRICATION  SERVICE DATA  


ENGINE OIL
Item Capacity Classification
Oil grade -
·

5W-30 and 10W-30:

API grade SL "Energy-Conserving", SM "Energy-Conserving", SN "Resource-Conserving" or ILSAC multigrade engine oil

·

15W-40 and 20W-50:

API grade SL, SM or SN multigrade engine oil


Drain and refill without oil filter change 5.2 liters (5.5 US qts, 4.6 Imp qts.) -
Drain and refill with oil filter change 5.5 liters (5.8 US qts, 4.8 Imp qts.) -
Dry fill 6.6 liters (7.0 US qts, 5.8 Imp qts.) -

LUBRICATION SYSTEM (Standard Oil Pressure)
Condition Specified Condition
Idle 29 kPa (0.3 kgf/cm2, 4.2 psi) or higher
3000 rpm 294 to 588 kPa (3.0 to 6.0 kgf/cm2, 43 to 85 psi)

OIL PRESSURE SWITCH
Tester Connection Condition Specified Condition
1 - Body ground Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher

OIL PUMP
Tip clearance Standard 0.06 to 0.16 mm (0.00236 to 0.00630 in.)
Maximum 0.16 mm (0.00630 in.)
Side clearance Standard 0.03 to 0.09 mm (0.00118 to 0.00354 in.)
Maximum 0.09 mm (0.00354 in.)
Body clearance Standard 0.250 to 0.325 mm (0.00984 to 0.0128 in.)
Maximum 0.325 mm (0.0128 in.)