Home › General › SPECIFICATIONS › 1GR-FE BATTERY / CHARGING › from 2012.04
RM1840EF _V1 General _009566 SPECIFICATIONS _0052047 1GR-FE BATTERY / CHARGING F

SPECIFICATIONS  1GR-FE BATTERY / CHARGING  SERVICE DATA  


Battery Standard specific gravity 1.25 to 1.29 at 20°C (68°F)
Charging circuit without load Standard current 10 A or less
Standard voltage 13.2 to 14.8 V
Charging circuit with load Standard current 30 A or higher
Generator rotor Slip rings Standard resistance 1.8 to 2.8 Ω at 20 °C (68°F)
Slip ring - Rotor core Standard resistance 10 kΩ or higher
Slip ring diameter Standard diameter 15.3 to 15.5 mm (0.602 to 0.610 in.)
Minimum diameter 14.9 mm (0.587 in.)
Voltage regulator with brush Exposed brush length Standard exposed length 13.2 mm (0.520 in.)
Minimum exposed length 6.0 mm (0.236 in.)