Home › General › MAINTENANCE › BODY › from 2012.10
RM1840EF _V1 General _009567 MAINTENANCE _0052055 BODY N

MAINTENANCE  BODY  GENERAL MAINTENANCE  


PROCEDURE

Hide 1.TIGHTEN BOLTS AND NUTS

a.

Tighten the bolts and nuts on the chassis parts listed below, if necessary.

·

Front axle and suspension

·

Drivetrain

·

Rear axle and suspension

·

Brake system

·

Engine mounting

·

Other chassis parts



b.

Tighten the bolts and nuts on the body parts listed below, if necessary.

·

Seat belt system

·

Seats

·

Doors and hood

·

Body mountings

·

Fuel tank

·

Exhaust pipe system

·

Other body parts



Hide 2.INSPECT TIRE AND INFLATION PRESSURE

a.

Check the tires for wear and proper inflation pressure (See page Suspension>TIRE / WHEEL>TIRE AND WHEEL SYSTEM>INSPECTION).


Hide 3.INSPECT LIGHTS, HORN, WIPERS AND WASHERS

Hide 4.CLEAN OR REPLACE AIR CONDITIONING FILTER

a.

Remove the glove compartment door assembly.


b.

Remove the air conditioning filter (clean air filter) (See page Vehicle Interior>HEATING / AIR CONDITIONING>BLOWER UNIT>DISASSEMBLY).


c.

Visually inspect the surface of the air conditioning filter (clean air filter).


d.

If the air conditioning filter (clean air filter) is contaminated with foreign matter, clean or replace it according to the maintenance schedule.

NOTICE:

Some filters are not able to be cleaned.



Hide 5.INSPECT REFRIGERANT AMOUNT FOR AIR CONDITIONER

a.

Check the sight glass on the liquid tube (See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT>ON-VEHICLE INSPECTION).


Hide 6.CORROSION INSPECTION

Hide 7.ROAD TEST

a.

Check the engine and chassis for abnormal noises.


b.

Check that the brakes work properly and do not drag.


c.

Check that the parking brake operates properly.


Hide 8. FINAL INSPECTION

a.

Check the operation of the body parts.

i.

Hood

·

Auxiliary catch operates properly.

·

Hood locks securely when closed.



ii.

Front doors

·

Door locks operate properly.

·

Doors close properly.



iii.

Rear doors

·

Door locks operate properly.

·

Doors close properly.



iv.

Tail gate

·

Tail gate locks operate properly.

·

Tail gate close properly.



v.

Seats

·

Seat adjusts easily and locks securely in any position.

·

Front seatbacks lock securely in any position.

·

Fold-down rear seatbacks lock securely.



vi.

Be sure to deliver a clean car. Make sure to check the following:

·

Steering wheel

·

Shift lever knob

·

All switches and knobs


·

Door handles


·

Seats